The 10 1/2″ Wylie Hypogastric Clamp with 70mm jaws is a specialized surgical instrument associated with vascular surgery and procedures involving the pelvic vasculature. Clamps in this category are designed to provide controlled engagement of selected anatomical structures during surgical exposure and vascular management. The Wylie pattern is associated with vascular instrumentation, making accurate identification of the instrument's intended application important when selecting it for a surgical instrument set.

With an overall length of 10 1/2 inches and a specified jaw length of 70mm, this instrument offers a defined size profile for surgical procurement. The extended jaw dimension may support engagement across a longer segment of the intended structure, depending on the exact jaw shape and clamping mechanism. The product title does not specify the jaw curvature, serration pattern, or occlusion characteristics, so these details should be confirmed with the manufacturer before clinical use.

Design and Jaw Configuration

The Wylie hypogastric clamp is intended for applications requiring controlled clamping of appropriate vascular or pelvic structures. Its 70mm jaw length is an important selection specification because jaw dimensions influence the area that can be engaged and the instrument's suitability for a particular surgical approach.

The overall length of 10 1/2 inches provides a practical dimensional reference for instrument selection. Actual access, reach, and handling characteristics also depend on the jaw profile, handle geometry, joint construction, and locking mechanism.

Because vascular clamps may be designed for different degrees of occlusion and different anatomical targets, the clamp's intended function must be verified from the manufacturer's technical documentation. It should not be assumed to provide complete or partial occlusion without confirmation of its specific design.

Applications in Vascular and Pelvic Surgery

Wylie-pattern hypogastric clamps may be considered for selected procedures involving the pelvic vasculature and hypogastric vessels, subject to the manufacturer's intended-use specifications. Instruments in this category may support vascular control during surgical exposure, reconstruction, or other procedures in which controlled clamping is clinically indicated.

The selection of a vascular clamp requires consideration of the target vessel, required clamping function, jaw dimensions, and tissue-handling characteristics. A clamp intended for one vascular application may not be appropriate for another. Surgeons should use the instrument only for indications and techniques supported by the manufacturer and their clinical training.

For hospitals and surgical centers, accurate product identification helps ensure that the instrument supplied matches the requirements of the planned procedure.

Material and Manufacturing Considerations

The product title does not identify the exact material grade, surface finish, or manufacturing specifications. These details should be obtained from the supplier before describing the instrument as a particular grade of stainless steel or making claims about corrosion resistance.

For professional surgical applications, the clamp should have properly aligned jaws, reliable handle movement, and a secure joint and locking mechanism where applicable. Smooth operation and consistent jaw engagement are important considerations when evaluating vascular instruments.

Before use, inspect the jaw surfaces, alignment, joint, and locking components. Remove any instrument showing deformation, corrosion, damage, or unreliable closure from service according to the healthcare facility's procedures.

Cleaning, Sterilization, and Maintenance

If the instrument is supplied as reusable, cleaning and sterilization must follow the manufacturer's validated instructions for use. Pay particular attention to the jaw surfaces, joint, and any locking mechanism, where blood and other biological material may accumulate.

After cleaning, inspect the instrument for residual soil, wear, jaw misalignment, and mechanical defects. The clamp should move and close as intended by its design. Sterilization compatibility, cycle parameters, and any lubrication requirements must be confirmed through the manufacturer's documentation rather than assumed.

Appropriate reprocessing and routine inspection help maintain the instrument's condition and support safe use in healthcare environments.

A Specialized Instrument for Surgical Procurement

The 10 1/2″ Wylie Hypogastric Clamp with 70mm jaws provides a specific pattern, overall length, and jaw measurement for surgical instrument selection. These specifications help procurement teams distinguish the instrument from other vascular clamps with different jaw lengths or configurations.

Before ordering, verify the jaw profile, intended vascular application, material, locking mechanism, and approved reprocessing requirements. Confirming these details helps ensure that the selected instrument is appropriate for the intended surgical procedure and the facility's instrument-processing protocols.

Key Features

• Instrument Type: Wylie hypogastric surgical clamp

• Overall Length: 10 1/2 inches

• Jaw Length: 70mm

• Surgical Specialty: Vascular and pelvic surgery

• Design Purpose: Controlled clamping of intended anatomical structures

• Jaw Specification: Extended 70mm jaw length

• Instrument Selection: Intended application should be verified with the manufacturer

• Mechanical Inspection: Check jaw alignment, joint movement, and closure

• Material Verification: Confirm material grade and surface finish with the supplier

• Reprocessing: Follow manufacturer-approved cleaning and sterilization instructions

• Clinical Use: For trained healthcare professionals following the instrument's intended use

Product Specifications

Frequently Asked Questions

1. What is a Wylie hypogastric clamp used for?

A Wylie hypogastric clamp is a specialized surgical clamp associated with selected vascular and pelvic procedures. Its precise clinical application depends on the model's intended use and jaw design.

2. What is the jaw length of this Wylie hypogastric clamp?

The specified jaw length is 70mm, which is an important measurement when evaluating the instrument for a particular surgical application.

3. What is the overall length of the Wylie hypogastric clamp?

The overall length is 10 1/2 inches, providing a reference for comparing the instrument with other vascular clamps.

4. Is the Wylie hypogastric clamp used in vascular surgery?

Yes, Wylie-pattern hypogastric clamps are associated with vascular instrumentation. The exact procedures and clamping functions suitable for this model should be confirmed with the manufacturer.

5. What material is used to manufacture this surgical clamp?

The exact material grade is not provided in the product title. Contact the supplier for verified information about the material, finish, and construction.

6. Is this Wylie hypogastric clamp reusable?

Reusable status must be confirmed with the manufacturer. If designed for reuse, the instrument must be cleaned, inspected, and sterilized according to its validated instructions for use.

7. How should a Wylie hypogastric clamp be maintained?

Inspect the jaws, joint, closure, and locking mechanism before use. Follow the manufacturer's approved cleaning and sterilization procedures, and remove damaged or malfunctioning instruments from service.

8. What should buyers verify before purchasing a 70mm jaw hypogastric clamp?

Buyers should confirm the jaw length, jaw profile, intended clamping function, overall dimensions, material, locking mechanism, and approved reprocessing requirements to ensure compatibility with their surgical needs.