10 3/8″ Ochsner Aorta Clamp 1×2 Debakey Teeth
Direct Manufacturer Pricing • Tax Exclusive
- 10 3/8″ Ochsner Aorta Clamp designed with a curved configuration for secure vessel occlusion.
- 1×2 Debakey teeth provide a defined clamping profile for cardiovascular procedures.
- Curved design supports a specialized working orientation within the operative field.
- Suitable for cardiac, thoracic, and vascular surgery applications requiring a curved Aorta Clamp.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 10 3/8″ Ochsner Aorta Clamp is a specialized cardiovascular instrument designed for secure, atraumatic vessel control during major cardiovascular and vascular procedures. Its 1×2 Debakey teeth provide a distinct working orientation that can assist with positioning the clamp within the operative field.
With an overall length of 10 3/8 inches and a 1×2 Debakey teeth configuration, this Aorta Clamp provides a defined clamping profile for cardiovascular applications. The ergonomic design allows the working end to approach the aorta from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 10 3/8-inch overall length for controlled manual handling.
- 1×2 Debakey teeth provide a defined clamping profile.
- Curved configuration for specialized working orientation.
- Designed for secure vessel occlusion and protection of surrounding tissue.
- Suitable for cardiac, thoracic, and vascular surgery applications.
- Supports positioning of the working end within the operative field.
- Specialized Ochsner pattern for professional cardiovascular instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Ochsner Aorta Clamp |
| Overall Length | 10 3/8″ |
| Working End / Blade / Jaw | 1×2 Debakey teeth |
| Configuration | Curved |
| Primary Function | Vessel Occlusion |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Cardiovascular / Vascular Surgery |
The 10 3/8″ Ochsner Aorta Clamp combines a 10 3/8-inch overall length with a 1×2 Debakey teeth configuration.
Its defined clamping profile is intended for secure vessel occlusion in cardiovascular applications.
Design & Function
The Ochsner Aorta Clamp features a curved working configuration designed to provide a specialized orientation during vessel occlusion. The 1×2 Debakey teeth can assist in positioning the clamp according to the requirements of the operative field.
The clamping profile provides a defined occlusion capability, while the 10 3/8-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for cardiovascular procedures requiring a curved instrument type.
Surgical Applications
The 10 3/8″ Ochsner Aorta Clamp may be used for cardiovascular and vascular surgery applications involving secure vessel occlusion. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the Ochsner Aorta Clamp before use, paying particular attention to the working end, jaw alignment, and clamping edges. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the Ochsner Aorta Clamp appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Aorta Clamp?
The overall length is 10 3/8 inches.
2. What is the working end / blade or tip design of the instrument?
It features 1×2 Debakey teeth.
3. Is this Aorta Clamp curved or straight?
It features a curved configuration.
4. What is an Aorta Clamp used for?
It is designed for controlled vessel occlusion in cardiovascular applications.
5. What clinical advantage does the curved design provide?
The curved design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for cardiovascular surgery?
It may be used in cardiovascular and vascular surgery applications where a curved Aorta Clamp is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Aorta Clamp be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.