10″ Satinsky Vena Cava Clamp 5.0cm Long, 13mm Deep Jaws

The 10″ Satinsky Vena Cava Clamp with 5.0 cm long and 13 mm deep jaws is a specialized cardiovascular surgical instrument intended for vascular clamping procedures where its specific jaw configuration is appropriate. The Satinsky pattern is associated with angled jaws that can facilitate access to selected vascular structures during cardiovascular and vascular surgery.

With an overall length of 10 inches (25.4 cm), this instrument provides extended reach for appropriate operative settings. Its specified jaw dimensions distinguish it from other Satinsky vascular clamps and help surgical teams and procurement professionals select the intended pattern.

Jaw Design and Dimensions

This Satinsky Vena Cava Clamp features jaws measuring 5.0 cm (50 mm) in length and 13 mm in depth. These measurements are important when comparing vascular instruments because jaw dimensions influence the working-end profile and the area of tissue engaged during clamping.

The angled jaw configuration associated with the Satinsky pattern may support selected clamping techniques, including partial vascular occlusion when appropriate for the instrument's design and intended procedure. The precise jaw curvature, serration pattern, and closing characteristics of this model should be confirmed with the manufacturer before clinical use.

Cardiovascular and Vascular Surgical Applications

Satinsky clamps are used in selected cardiovascular and vascular procedures that require controlled engagement of blood vessels. Depending on the specific model and surgical technique, they may be appropriate for procedures involving the vena cava or other vascular structures.

The 5.0 cm jaw length and 13 mm jaw depth provide useful reference dimensions for distinguishing this clamp from smaller jaw configurations. Final instrument selection should consider vessel anatomy, operative access, the required clamping function, and the surgeon's established technique.

Vascular instruments must be selected carefully because excessive or uneven pressure can injure delicate tissue. This clamp should be used only by qualified surgical professionals and for applications consistent with the manufacturer's specifications.

Material and Construction

Cardiovascular clamps are commonly manufactured from medical-grade stainless steel because of its mechanical strength, corrosion resistance, and suitability for validated cleaning and sterilization processes when designed for reuse. The exact material grade and finish of this particular Satinsky clamp should be verified with the supplier.

Reliable performance depends on proper jaw alignment, appropriate mechanical function, and the absence of structural defects. Before use, qualified personnel should inspect the jaws, handles, and locking mechanism, if present, for deformation, wear, corrosion, or other damage.

Cleaning, Sterilization, and Maintenance

If supplied as a reusable instrument, the Satinsky Vena Cava Clamp must be cleaned, inspected, and sterilized according to the manufacturer's validated instructions and the healthcare facility's infection prevention protocols.

The jaws, joints, and locking components, if present, should receive appropriate attention during cleaning to remove retained biological material. Following cleaning, trained personnel should inspect the instrument for misalignment, damaged clamping surfaces, corrosion, and mechanical defects.

The approved sterilization method and processing parameters must follow the manufacturer's instructions for this specific product. Instruments that fail inspection should be removed from service until appropriately assessed.

Selecting the Correct Satinsky Vena Cava Clamp

When purchasing the 10″ Satinsky Vena Cava Clamp, verify the overall length, 5.0 cm jaw length, 13 mm jaw depth, jaw configuration, material, and intended application. These specifications help distinguish the instrument from other vascular clamps and support accurate ordering.

For hospitals, cardiovascular surgical centers, and medical instrument distributors, accurate product identification helps maintain organized inventories and reduces confusion between similar instrument patterns. Proper selection, inspection, and validated reprocessing are essential to responsible surgical instrument management.

Key Features

• Instrument name: 10″ Satinsky Vena Cava Clamp

• Overall length: 10 inches (25.4 cm)

• Jaw length: 5.0 cm (50 mm)

• Jaw depth: 13 mm

• Instrument category: Cardiovascular vascular clamp

• Pattern: Satinsky

• Working-end design: Angled jaw pattern; confirm exact configuration with the manufacturer

• Intended application: Selected vascular clamping procedures

• Material: Verify exact composition with the supplier

• Professional use: Intended for qualified surgical personnel

• Maintenance: Requires regular inspection and appropriate care

• Sterilization: Follow validated manufacturer instructions

Product Specifications

Frequently Asked Questions

1. What is a 10″ Satinsky Vena Cava Clamp used for?

A Satinsky Vena Cava Clamp is a specialized vascular instrument used in selected procedures requiring controlled clamping of blood vessels. Its precise application depends on the model's design and the surgical technique.

2. What are the jaw dimensions of this Satinsky clamp?

The stated jaw length is 5.0 cm (50 mm), and the jaw depth is 13 mm.

3. What is the overall length of this vascular clamp?

The overall length is 10 inches, equivalent to 25.4 cm.

4. What distinguishes this Satinsky clamp from other sizes?

Its specified 5.0 cm jaw length and 13 mm jaw depth distinguish it dimensionally from other Satinsky clamp variants. Confirm the jaw profile and intended application before selecting the instrument.

5. What material is used to manufacture this clamp?

The exact material grade should be confirmed with the manufacturer or supplier. Medical-grade stainless steel is commonly used for reusable cardiovascular surgical instruments.

6. Can the Satinsky Vena Cava Clamp be sterilized?

If labeled as reusable, the instrument must be cleaned and sterilized according to the manufacturer's validated instructions and the healthcare facility's approved reprocessing procedures.

7. How do I choose the correct Satinsky clamp size?

Compare the overall length, jaw length, jaw depth, jaw configuration, and intended surgical application. Verify all specifications with the supplier to ensure the instrument is appropriate for the intended procedure.