10″ Lateral Wall Retractor 3 1/2″ Blade
Direct Manufacturer Pricing • Tax Exclusive
- 10″ Lateral Wall Retractor designed with a straight configuration for controlled retraction during gynecological procedures.
- 3 1/2-inch blade provides a defined retraction profile for gynecological procedures.
- Straight design supports a specialized working orientation within the operative field.
- Suitable for gynecological and pelvic surgery applications requiring a straight retractor.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 10″ Lateral Wall Retractor is a specialized gynecological instrument designed for retracting and holding back the vaginal or pelvic wall during examinations and surgical procedures. Its wide blade provides effective exposure of the operative field, improving visibility and access for surgeons.
With an overall length of 10 inches and a 3 1/2-inch blade, this retractor provides a defined retraction profile for gynecological applications. The ergonomic design allows the working end to approach the anatomical target from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 10-inch overall length for controlled manual handling.
- 3 1/2-inch blade provides a defined retraction profile.
- Ergonomic design for specialized working orientation.
- Designed for retraction during gynecological examinations and surgeries.
- Suitable for gynecological and pelvic surgery applications.
- Supports positioning of the working end within the operative field.
- Specialized Lateral Wall pattern for professional gynecological instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Lateral Wall Retractor |
| Overall Length | 10″ |
| Working End / Blade / Jaw | 3 1/2-inch blade |
| Configuration | Straight |
| Primary Function | Retraction |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Gynecological / Pelvic Surgery |
The 10″ Lateral Wall Retractor combines a 10-inch overall length with a 3 1/2-inch blade and Straight configuration.
Its defined working profile is intended for retraction during gynecological procedures.
Design & Function
The Lateral Wall Retractor features a straight working configuration designed to provide a specialized orientation during gynecological procedures. The blade design can assist in positioning the working end according to the requirements of the operative field.
The 3 1/2-inch blade provides a defined retraction profile, while the 10-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for gynecological procedures requiring a straight retractor.
Surgical Applications
The 10″ Lateral Wall Retractor may be used for gynecological and pelvic surgery applications involving retraction of the vaginal or pelvic wall. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the Lateral Wall Retractor before use, paying particular attention to the blade alignment and structural integrity. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the Lateral Wall Retractor appropriately to protect its blade and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Lateral Wall Retractor?
The overall length is 10 inches.
2. What is the working end / blade or tip design of the instrument?
It features 3 1/2-inch blade.
3. Is this Lateral Wall Retractor curved or straight?
It features a Straight configuration.
4. What is a Lateral Wall Retractor used for?
It is designed for controlled retraction in gynecological applications.
5. What clinical advantage does the straight design provide?
The straight design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for gynecological surgery?
It may be used in gynecological and pelvic surgery applications where a straight retractor is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Lateral Wall Retractor be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.