11 3/4″ French Rod Bender For Rods up to 7mm
Direct Manufacturer Pricing • Tax Exclusive
- 11 3/4″ French Rod Bender For Rods up to 7mm designed with a French-style configuration for precise rod bending.
- Capacity for rods up to 7mm provides a defined bending profile for orthopedic procedures.
- French-style design supports a specialized working orientation within the operative field.
- Suitable for orthopedic and implant surgery applications requiring a rod bending instrument.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 11 3/4″ French Rod Bender For Rods up to 7mm is a specialized orthopedic instrument designed for precise contouring of orthopedic rods up to 7mm in diameter. Its extended length provides controlled leverage for smooth, accurate bends without deforming the implant.
With an overall length of 11 3/4 inches and a capacity for rods up to 7mm, this rod bender provides a defined bending profile for orthopedic applications. The French-style bending profile allows the working end to approach the rod from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 11 3/4-inch overall length for controlled manual handling.
- Designed for rods up to 7mm provides a defined bending profile.
- French-style bending profile for specialized working orientation.
- Designed for precise contouring of orthopedic rods.
- Suitable for orthopedic and implant surgery applications.
- Supports positioning of the working end within the operative field.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | French Rod Bender |
| Overall Length | 11 3/4″ |
| Working End / Blade / Jaw | For rods up to 7mm |
| Configuration | French-style |
| Primary Function | Rod Bending |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Orthopedic / Implant Surgery |
The 11 3/4″ French Rod Bender For Rods up to 7mm combines a 11 3/4-inch overall length with a capacity for rods up to 7mm and French-style configuration.
Its defined working profile is intended for precise contouring in orthopedic applications.
Design & Function
The French Rod Bender features a French-style working configuration designed to provide a specialized orientation during rod bending. The bending profile can assist in positioning the working end according to the requirements of the operative field.
The rod capacity provides a defined bending profile, while the 11 3/4-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for orthopedic procedures requiring a rod bending instrument.
Surgical Applications
The 11 3/4″ French Rod Bender For Rods up to 7mm may be used for orthopedic and implant surgery applications involving precise rod contouring. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the French Rod Bender before use, paying particular attention to the working end and jaw alignment. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the French Rod Bender appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this French Rod Bender?
The overall length is 11 3/4 inches.
2. What is the working end / blade or tip design of the instrument?
It features capacity for rods up to 7mm.
3. Is this French Rod Bender curved or straight?
It features a French-style configuration.
4. What is a French Rod Bender used for?
It is designed for controlled rod bending in orthopedic applications.
5. What clinical advantage does the French-style design provide?
The design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for orthopedic surgery?
It may be used in orthopedic and implant surgery applications where a French-style rod bender is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the French Rod Bender be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.