11″ Howard Aortic Aneurysm Clamp 2×3 Teeth

The 11″ Howard Aortic Aneurysm Clamp 2×3 Teeth is a specialized surgical instrument intended for consideration in cardiovascular and vascular surgery settings. Designed for aortic clamping applications, this instrument is identified by its Howard pattern, 11-inch overall length, and 2×3-tooth configuration. These specifications help distinguish it from other aortic clamps with different jaw designs and dimensions.

Howard Aortic Clamp Design

Aortic aneurysm clamps are specialized instruments used in selected procedures involving the aorta. The appropriate clamp design depends on the surgical approach, anatomical requirements, and the intended method of vascular control. The Howard designation identifies this particular instrument pattern, while the tooth arrangement provides an additional feature for product identification.

The exact jaw curvature, jaw length, clamping mechanism, and tooth arrangement should be verified using the manufacturer's specifications. These details are important when selecting a clamp for a particular procedure or matching an instrument to an existing surgical set.

2×3-Tooth Jaw Configuration

The product title specifies a 2×3-tooth configuration, which describes the stated tooth arrangement. Tooth geometry can influence how the jaws engage tissue, so the exact pattern and intended function should be confirmed with the manufacturer. Buyers should not assume a particular degree of grip or tissue effect without verified product information.

When selecting a toothed vascular clamp, qualified healthcare professionals should consider the intended anatomical site, vessel characteristics, instrument design, and surgical technique. The instrument must be appropriate for the procedure and used according to its instructions for use.

11-Inch Overall Length

The stated overall length is 11 inches, providing a useful reference for procurement and inventory management. Overall length can affect reach and handling, but it should be assessed alongside jaw dimensions, curvature, and the clamp's working mechanism.

Healthcare facilities and surgical instrument distributors should confirm the full dimensions before purchasing, especially when replacing a specific model or assembling a procedure-specific cardiovascular set.

Applications in Cardiovascular Surgery

Aortic clamps are used in selected cardiovascular procedures where temporary vascular control is required. The suitability of this Howard clamp for a particular aortic procedure depends on its design specifications and the manufacturer's stated intended use. Its name alone does not establish suitability for every aneurysm-related or aortic surgical procedure.

Clinical selection and use should be determined by qualified surgical professionals. The clamp should be used only in accordance with the manufacturer's instructions and applicable clinical protocols.

Material, Sterilization, and Maintenance

The exact material composition, reusable status, and sterilization compatibility have not been specified in the product title. Confirm these details with the manufacturer or supplier before ordering. If the instrument is designed for reuse, follow validated cleaning, inspection, and sterilization instructions and the healthcare facility's infection-control procedures.

Before use, trained personnel should inspect the instrument for corrosion, damage, jaw misalignment, tooth deformation, and proper closure. Any instrument that fails inspection should be removed from service.

The 11″ Howard Aortic Aneurysm Clamp 2×3 Teeth is a specification-focused option for healthcare procurement teams and surgical instrument suppliers sourcing specialized cardiovascular instruments. Confirming the tooth pattern, jaw dimensions, material, and intended use helps ensure the selected instrument meets the requirements of the clinical setting.

Key Features

• Howard-pattern aortic aneurysm clamp

• Designed for specialized vascular clamping applications

• Overall length: 11 inches

• Tooth configuration: 2×3 teeth

• Intended specialty: cardiovascular and vascular surgery

• Toothed jaw design for a specified clamping configuration

• Exact jaw profile and dimensions to be confirmed

• Material composition to be verified with the supplier

• Reusable status to be confirmed

• Cleaning and sterilization according to manufacturer instructions

Product Specifications

Frequently Asked Questions

1. What is an 11″ Howard Aortic Aneurysm Clamp used for?

It is a specialized cardiovascular instrument intended for selected aortic clamping applications. Its precise use depends on the manufacturer's specifications and the requirements of the procedure.

2. What is the overall length of this clamp?

The stated overall length is 11 inches.

3. What does 2×3 teeth mean?

It identifies the stated tooth arrangement on the clamp's jaws. The precise geometry and configuration should be confirmed with the manufacturer.

4. Why is the jaw design important in aortic clamps?

Jaw geometry and tooth configuration affect how an instrument engages tissue. The appropriate design must be selected by qualified professionals according to the intended procedure and manufacturer's guidance.

5. Is this clamp suitable for all aortic aneurysm procedures?

No single clamp should be assumed suitable for every procedure. Suitability depends on the instrument's intended use, dimensions, jaw design, and clinical requirements.

6. What material is this clamp made from?

The product title does not specify the material. Contact the manufacturer or supplier for the exact material grade and composition.

7. Can the clamp be sterilized and reused?

Reusable status and sterilization compatibility must be confirmed with the supplier. Follow the manufacturer's validated reprocessing instructions.

8. What should buyers verify before ordering?

Confirm the 11-inch length, 2×3-tooth configuration, jaw dimensions, material, intended application, and reusable status before purchasing.