12 1/2″ Boss Osteotome 1/2″ Angled
Direct Manufacturer Pricing • Tax Exclusive
- 12 1/2″ Boss Osteotome 1/2″ Angled designed with an angled configuration for powerful bone cutting and shaping.
- 1/2″ cutting edge provides a defined cutting profile for orthopedic procedures.
- Angled design supports a specialized working orientation within the operative field.
- Suitable for orthopedic and reconstructive surgery applications requiring an angled osteotome.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 12 1/2″ Boss Osteotome 1/2″ Angled is a specialized orthopedic instrument designed for powerful yet precise bone cutting where angled access is required. Its angled blade improves visibility and control during orthopedic and reconstructive bone procedures.
With an overall length of 12 1/2 inches and a sharp 1/2″ cutting edge, this osteotome provides a defined cutting profile for orthopedic applications. The angled design allows the working end to approach the bone from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 12 1/2-inch overall length for enhanced reach and control.
- 1/2″ cutting edge provides a defined cutting profile.
- Angled configuration for improved access and leverage.
- Designed for powerful bone cutting and shaping.
- Suitable for orthopedic and reconstructive surgery applications.
- Supports positioning of the working end within the operative field.
- Specialized Boss pattern for professional orthopedic instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Boss Osteotome |
| Overall Length | 12 1/2″ |
| Working End / Blade / Jaw | 1/2″ cutting edge |
| Configuration | Angled |
| Primary Function | Bone Cutting and Shaping |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Orthopedic / Reconstructive Surgery |
The 12 1/2″ Boss Osteotome 1/2″ Angled combines a 12 1/2-inch overall length with a 1/2″ cutting edge and angled configuration.
Its defined working profile is intended for powerful bone cutting and shaping in orthopedic applications.
Design & Function
The Boss Osteotome features an angled working configuration designed to provide a specialized orientation during bone preparation. The angled blade can assist in positioning the working end according to the requirements of the operative field.
The 1/2″ cutting edge provides a defined cutting profile, while the 12 1/2-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for orthopedic procedures requiring an angled osteotome.
Surgical Applications
The 12 1/2″ Boss Osteotome 1/2″ Angled may be used for orthopedic and reconstructive surgery applications involving precise bone cutting. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the osteotome before use, paying particular attention to the working end, blade alignment, and cutting edges. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the osteotome appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Osteotome?
The overall length is 12 1/2 inches.
2. What is the working end / blade or tip design of the instrument?
It features 1/2″ cutting edge.
3. Is this Osteotome curved or straight?
It features an angled configuration.
4. What is a Osteotome used for?
It is designed for controlled bone cutting and shaping in orthopedic applications.
5. What clinical advantage does the angled design provide?
The angled design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for orthopedic surgery?
It may be used in orthopedic and reconstructive surgery applications where an angled osteotome is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Osteotome be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.