13 1/2″ VATS Needle Holder 10mm Shaft Extra Heavy TC Jaws
Direct Manufacturer Pricing • Tax Exclusive
- 13 1/2″ VATS Needle Holder designed with a straight configuration for controlled needle grasping and positioning.
- 10 mm shaft diameter provides a defined grasping profile for cardiovascular procedures.
- Straight design supports a specialized working orientation within the operative field.
- Suitable for cardiovascular and minimally invasive surgery applications requiring a straight needle holder.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 13 1/2″ VATS Needle Holder is a specialized cardiovascular instrument designed for controlled needle grasping, positioning, and manipulation during video-assisted thoracic surgery and other appropriate minimally invasive procedures. Its extended 13 1/2-inch length provides useful reach into the operative field while allowing the surgeon to maintain manual control outside the immediate surgical site.
With an overall length of 13 1/2 inches and a 10mm shaft, this needle holder provides a defined grasping profile for cardiovascular applications. The extra heavy TC jaws allow for secure handling of needles and sutures, supporting controlled manual manipulation during procedures.
Key Features
- 13 1/2-inch overall length for controlled manual handling.
- 10 mm shaft diameter provides a defined grasping profile.
- Extra Heavy TC jaws for secure needle handling.
- Designed for controlled needle grasping and positioning.
- Suitable for cardiovascular and minimally invasive surgery applications.
- Supports positioning of the working end within the operative field.
- Specialized VATS pattern for professional cardiovascular instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | VATS Needle Holder |
| Overall Length | 13 1/2″ |
| Working End / Blade / Jaw | 10 mm or Extra Heavy TC Jaws |
| Configuration | Straight |
| Primary Function | Needle Grasping and Positioning |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Cardiovascular / Minimally Invasive Surgery |
The 13 1/2″ VATS Needle Holder combines a 13 1/2-inch overall length with a 10 mm shaft and extra heavy TC jaws.
Its defined working profile is intended for controlled needle grasping and positioning in cardiovascular applications.
Design & Function
The VATS Needle Holder features a straight working configuration designed to provide a specialized orientation during minimally invasive procedures. The extra heavy TC jaws can assist in positioning the needle according to the requirements of the operative field.
The 10 mm shaft provides a defined grasping profile, while the 13 1/2-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for cardiovascular procedures requiring a straight needle holder.
Surgical Applications
The 13 1/2″ VATS Needle Holder may be used for cardiovascular and minimally invasive surgery applications involving controlled needle grasping and manipulation. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the needle holder before use, paying particular attention to the working end, jaw alignment, and gripping edges. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the needle holder appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Needle Holder?
The overall length is 13 1/2 inches.
2. What is the working end / blade or tip design of the instrument?
It features 10 mm shaft or Extra Heavy TC Jaws.
3. Is this Needle Holder curved or straight?
It features a Straight configuration.
4. What is a Needle Holder used for?
It is designed for controlled needle grasping and positioning in cardiovascular applications.
5. What clinical advantage does the extra heavy TC jaws provide?
The extra heavy TC jaws provide a specialized working orientation for secure needle handling within the operative field.
6. Is this instrument suitable for cardiovascular surgery?
It may be used in cardiovascular and minimally invasive applications where a straight needle holder is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Needle Holder be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.