14-1/2″ VATS Debakey Clamp 10mm Shaft, 110mm Tapered Debakey 1×2 Jaws

The 14-1/2″ VATS DeBakey Clamp is designed for specialized surgical environments involving video-assisted thoracic surgery (VATS). It features a 10 mm shaft, a 110 mm tapered section, and DeBakey-style 1×2 jaws. These specifications help distinguish this model from other VATS clamps and vascular instruments.

Its extended length provides a long instrument profile for procedures where reach and access are important considerations. The exact intended use should be confirmed with the manufacturer to ensure the instrument is appropriate for the required surgical application.

10 mm Shaft Design

This clamp features a 10 mm shaft diameter. Shaft dimensions are important when selecting surgical instruments for minimally invasive procedures, especially when access-port or equipment compatibility must be considered. Confirm the instrument's compatibility with the intended surgical setup before ordering.

110 mm Tapered Section

The instrument has a specified 110 mm tapered section. This measurement is an important identifying feature when comparing similar VATS instruments. For precise product documentation, verify how the manufacturer defines and measures the tapered section.

DeBakey 1×2 Jaw Configuration

The clamp incorporates DeBakey-style 1×2 jaws. This jaw designation identifies a specific toothed configuration, but the exact tooth geometry, jaw dimensions, and intended tissue application should be verified against the manufacturer's specifications.

Choosing the appropriate jaw design is important when matching a surgical instrument to the requirements of a procedure. Qualified surgical professionals should determine suitability according to the intended application and established clinical protocols.

Applications in Thoracic Surgery

VATS instruments are used in video-assisted thoracic surgical settings. This clamp may be considered for specialized thoracic instrument inventories when its documented specifications and intended function match procedural requirements. Do not assume compatibility with a particular access port or surgical technique based on shaft diameter alone.

Inspection and Instrument Care

Before use, inspect the shaft, jaws, alignment, and mechanical function for visible damage or defects. Cleaning, sterilization, inspection, and maintenance must follow the manufacturer's validated instructions. Confirm the instrument's material, reusability, and processing compatibility before adding it to a surgical set.

Selecting the Correct VATS DeBakey Clamp

When comparing VATS DeBakey clamps, check the overall length, shaft diameter, tapered-section measurement, and jaw configuration. Verifying these details helps support accurate product selection and purchasing for professional surgical environments.

5. Key Features

• VATS DeBakey clamp design

• Overall length of 14-1/2 inches

• 10 mm shaft diameter

• 110 mm tapered section

• DeBakey-style 1×2 jaws

• Extended instrument profile

• Designed for consideration in specialized thoracic surgical instrument sets

• Defined shaft and jaw specifications for product identification

• Suitable for professional surgical inventory selection

• Material and sterilization compatibility should be confirmed with the manufacturer

6. Product Specifications

7. Frequently Asked Questions

1. What is a VATS DeBakey Clamp?

It is a specialized surgical clamp identified for VATS applications and featuring a DeBakey-style jaw configuration. Confirm the exact intended use with the manufacturer.

2. What is the overall length of this instrument?

The specified overall length is 14-1/2 inches.

3. What is the shaft diameter?

This model has a 10 mm shaft diameter.

4. What does the 110 mm tapered specification refer to?

It identifies the stated measurement of the tapered section. Confirm the measurement reference with the manufacturer.

5. What does DeBakey 1×2 jaws mean?

It identifies the DeBakey-style toothed jaw configuration. The exact tooth pattern and jaw dimensions should be verified with the supplier.

6. Is this clamp intended for thoracic surgery?

It is identified as a VATS instrument associated with thoracic surgical settings. Its suitability for a specific procedure must be confirmed by qualified professionals using manufacturer documentation.

7. What material is the clamp made from?

The material is not specified in the supplied product title. Contact the supplier for the exact material and grade.

8. Can this clamp be sterilized and reused?

Confirm reusability and sterilization compatibility with the manufacturer. Follow the validated cleaning and sterilization instructions provided with the instrument.