14″ Curette Size 4-0 30° Tip
Direct Manufacturer Pricing • Tax Exclusive
- 14″ Curette Size 4-0 30° Tip designed with a 30° angled configuration for fine tissue removal.
- 4-0 tip size provides a defined cutting profile for orthopedic procedures.
- Angled design supports a specialized working orientation within the operative field.
- Suitable for orthopedic and surgical applications requiring a curette.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 14″ Curette Size 4-0 30° Tip is a specialized orthopedic instrument designed for fine and accurate tissue removal in confined or angled surgical sites. Its 30° angled working end provides a distinct working orientation that can assist with positioning the tip within the operative field.
With an overall length of 14 inches and a 4-0 tip size, this curette provides a defined cutting profile for orthopedic applications. The long shaft allows the working end to approach anatomical targets from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 14-inch overall length for controlled manual handling.
- 4-0 tip size provides a defined cutting profile.
- 30° angled configuration for specialized working orientation.
- Designed for fine tissue removal and access.
- Suitable for orthopedic and surgical applications.
- Supports positioning of the working end within the operative field.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Curette |
| Overall Length | 14″ |
| Working End / Blade / Jaw | 4-0 |
| Configuration | 30° Angled |
| Primary Function | Tissue Removal |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Orthopedic |
The 14″ Curette Size 4-0 30° Tip combines a 14-inch overall length with a 4-0 tip size and 30° angled configuration.
Its defined working profile is intended for fine tissue removal in orthopedic applications.
Design & Function
The Curette features a 30° angled working configuration designed to provide a specialized orientation during tissue removal. The angled working end design can assist in positioning the tip according to the requirements of the operative field.
The 4-0 tip size provides a defined cutting profile, while the 14-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for orthopedic procedures requiring a curette.
Surgical Applications
The 14″ Curette Size 4-0 30° Tip may be used for orthopedic and surgical applications involving fine tissue removal. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the curette before use, paying particular attention to the working end and tip alignment. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the curette appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Curette?
The overall length is 14 inches.
2. What is the working end / blade or tip design of the instrument?
It features 4-0.
3. Is this Curette angled or straight?
It features a 30° angled configuration.
4. What is a Curette used for?
It is designed for controlled tissue removal in orthopedic applications.
5. What clinical advantage does the angled design provide?
The angled design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for orthopedic surgery?
It may be used in orthopedic and surgical applications where a 30° angled curette is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Curette be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.