17 3/4″ VATS Suction 5mm Shaft with Port
Direct Manufacturer Pricing • Tax Exclusive
- 17 3/4″ VATS Suction 5mm Shaft with Port designed with a straight configuration for fluid aspiration.
- 5 mm shaft diameter provides a defined aspiration profile for cardiovascular procedures.
- Straight design supports a specialized working orientation within the operative field.
- Suitable for cardiovascular and thoracic surgery applications requiring a straight suction instrument.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 17 3/4″ VATS Suction 5mm Shaft with Port is a specialized cardiovascular instrument designed for fluid aspiration during video-assisted thoracic surgery (VATS) and other minimally invasive thoracic procedures. Its extended 17 3/4-inch length provides substantial working reach within the thoracic cavity, while the 5mm shaft offers a practical profile for use through compatible minimally invasive access pathways.
With an overall length of 17 3/4 inches and a 5mm shaft diameter, this suction instrument provides a defined aspiration profile for cardiovascular applications. The straight design allows the working end to approach anatomical targets from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 17 3/4-inch overall length for extended reach within the thoracic cavity.
- 5 mm shaft diameter provides a defined aspiration profile.
- Straight configuration for specialized working orientation.
- Designed for fluid aspiration during thoracic procedures.
- Suitable for cardiovascular and minimally invasive surgery applications.
- Supports positioning of the working end within the operative field.
- Specialized VATS pattern for professional cardiovascular instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | VATS Suction |
| Overall Length | 17 3/4″ |
| Working End / Blade / Jaw | 5 mm |
| Configuration | Straight |
| Primary Function | Fluid Aspiration |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Cardiovascular / Thoracic Surgery |
The 17 3/4″ VATS Suction 5mm Shaft with Port combines a 17 3/4-inch overall length with a 5 mm shaft diameter and straight configuration.
Its defined working profile is intended for fluid aspiration in cardiovascular applications.
Design & Function
The VATS Suction features a straight working configuration designed to provide a specialized orientation during thoracic procedures. The shaft design can assist in positioning the working end according to the requirements of the operative field.
The 5 mm shaft diameter provides a defined aspiration profile, while the 17 3/4-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for cardiovascular procedures requiring a straight suction instrument.
Surgical Applications
The 17 3/4″ VATS Suction 5mm Shaft with Port may be used for cardiovascular and thoracic surgery applications involving fluid aspiration. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the VATS Suction before use, paying particular attention to the working end and shaft alignment. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the VATS Suction appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this VATS Suction?
The overall length is 17 3/4 inches.
2. What is the working end / blade or tip design of the instrument?
It features 5 mm shaft diameter.
3. Is this VATS Suction curved or straight?
It features a Straight configuration.
4. What is a VATS Suction used for?
It is designed for controlled fluid aspiration in cardiovascular applications.
5. What clinical advantage does the straight design provide?
The straight design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for cardiovascular surgery?
It may be used in cardiovascular and thoracic applications where a straight and 5 mm suction instrument is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the VATS Suction be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.