4 3/4″ Derlacki Ossicle Holding Clamp 1mm Teeth
Direct Manufacturer Pricing • Tax Exclusive
- 4 3/4″ Derlacki Ossicle Holding Clamp designed with a serrated configuration for secure manipulation of delicate ossicular structures.
- 1 mm teeth provide a defined grasping profile for ENT procedures.
- Serrated design supports a specialized working orientation within the operative field.
- Suitable for ENT and middle ear surgery applications requiring a serrated instrument type.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 4 3/4″ Derlacki Ossicle Holding Clamp is a specialized ENT instrument designed for secure and precise manipulation of delicate ossicular structures during middle ear surgery. Its 1 mm serrated teeth provide a firm grip without crushing, allowing safe mobilization of ossicles.
With an overall length of 4 3/4 inches and 1 mm teeth, this clamp provides a defined grasping profile for ENT applications. The ergonomic design allows the working end to approach anatomical targets from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 4 3/4-inch overall length for controlled manual handling.
- 1 mm teeth provide a defined grasping profile.
- Serrated configuration for specialized working orientation.
- Designed for secure manipulation of delicate ossicular structures.
- Suitable for ENT and middle ear surgery applications.
- Supports positioning of the working end within the operative field.
- Specialized Derlacki pattern for professional ENT instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Derlacki Ossicle Holding Clamp |
| Overall Length | 4 3/4″ |
| Working End / Blade / Jaw | 1 mm teeth |
| Configuration | Serrated |
| Primary Function | Secure Manipulation of Ossicles |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | ENT / Middle Ear Surgery |
The 4 3/4″ Derlacki Ossicle Holding Clamp combines a 4 3/4-inch overall length with 1 mm teeth and Serrated configuration.
Its defined working profile is intended for secure manipulation of delicate ossicular structures in ENT applications.
Design & Function
The Derlacki Ossicle Holding Clamp features a serrated working configuration designed to provide a specialized orientation during middle ear surgery. The 1 mm teeth can assist in positioning the working end according to the requirements of the operative field.
The 1 mm teeth provide a defined grasping profile, while the 4 3/4-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for ENT procedures requiring a serrated instrument type.
Surgical Applications
The 4 3/4″ Derlacki Ossicle Holding Clamp may be used for ENT and middle ear surgery applications involving secure manipulation of delicate ossicular structures. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the Derlacki Ossicle Holding Clamp before use, paying particular attention to the working end, jaw alignment, and serrated edges. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the Derlacki Ossicle Holding Clamp appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Derlacki Ossicle Holding Clamp?
The overall length is 4 3/4 inches.
2. What is the working end / blade or tip design of the instrument?
It features 1 mm teeth.
3. Is this Derlacki Ossicle Holding Clamp curved or straight?
It features a Serrated configuration.
4. What is a Derlacki Ossicle Holding Clamp used for?
It is designed for controlled secure manipulation of ossicles in ENT applications.
5. What clinical advantage does the serrated design provide?
The serrated design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for ENT surgery?
It may be used in ENT and middle ear surgery applications where a serrated instrument type is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Derlacki Ossicle Holding Clamp be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.