5 1/8″ Swiss Osteotome Straight 4mm Edge
Direct Manufacturer Pricing • Tax Exclusive
- 5 1/8″ Swiss Osteotome Straight 4mm Edge designed with a straight configuration for controlled bone cutting and separation.
- 4 mm working width provides a defined cutting profile for ENT procedures.
- Straight design supports a specialized working orientation within the operative field.
- Suitable for ENT and craniofacial surgery applications requiring a straight osteotome.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 5 1/8″ Swiss Osteotome Straight 4mm Edge is a specialized ENT instrument designed for highly precise osteotomies. Its narrow cutting edge provides a distinct working orientation that can assist with positioning the cutting end within the operative field.
With an overall length of 5 1/8 inches and a 4 mm working width, this osteotome provides a defined cutting profile for craniofacial and small bone applications. The straight design allows the working end to approach bone from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 5 1/8-inch overall length for controlled manual handling.
- 4 mm working width provides a defined cutting profile.
- Straight configuration for specialized working orientation.
- Designed for controlled bone separation and osteotomies.
- Suitable for ENT and craniofacial surgery applications.
- Supports positioning of the working end within the operative field.
- Specialized Swiss pattern for professional ENT instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Swiss Osteotome |
| Overall Length | 5 1/8″ |
| Working End / Blade / Jaw | 4 mm |
| Configuration | Straight |
| Primary Function | Bone Cutting and Separation |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | ENT / Craniofacial Surgery |
The 5 1/8″ Swiss Osteotome Straight 4mm Edge combines a 5 1/8-inch overall length with a 4 mm working width and straight configuration.
Its defined working profile is intended for controlled bone separation in ENT applications.
Design & Function
The Swiss Osteotome features a straight working configuration designed to provide a specialized orientation during osteotomies. The straight working end design can assist in positioning the cutting end according to the requirements of the operative field.
The 4 mm working width provides a defined cutting profile, while the 5 1/8-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for ENT procedures requiring a straight osteotome.
Surgical Applications
The 5 1/8″ Swiss Osteotome Straight 4mm Edge may be used for ENT and craniofacial surgery applications involving precise bone cutting and separation. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the osteotome before use, paying particular attention to the working end, jaw alignment, and cutting edges. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the osteotome appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Osteotome?
The overall length is 5 1/8 inches.
2. What is the working end / blade or tip design of the instrument?
It features 4 mm working width.
3. Is this Osteotome curved or straight?
It features a Straight configuration.
4. What is a Osteotome used for?
It is designed for controlled bone cutting and separation in ENT applications.
5. What clinical advantage does the straight design provide?
The straight design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for ENT surgery?
It may be used in ENT and craniofacial surgery applications where a straight osteotome is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Osteotome be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.