5″ Tubing Towel Clamp Jaw Opening 1.2 cm

The 5″ Tubing Towel Clamp Jaw Opening 1.2 cm is a specialized surgical accessory designed for securing tubing and supporting the organization of equipment within appropriate clinical environments. Its stated overall length of 5 inches and jaw opening of 1.2 cm help identify its size and distinguish it from other towel clamps and tubing-holding instruments.

Design and Configuration

The instrument features a compact overall profile with a specified jaw opening of 1.2 cm, equivalent to 12 mm. This opening dimension is an important selection consideration when determining whether the clamp can accommodate the intended tubing or material. Actual compatibility depends on the jaw shape, closure range, gripping surface, and manufacturer's design specifications.

Tubing clamps and towel clamps may have different working-end designs and intended uses. Buyers should verify the exact configuration of this model rather than assuming that every towel clamp is suitable for every type of tubing. The manufacturer's product information should clarify the jaw design, closure mechanism, and approved applications.

Clinical and Surgical Applications

Tubing-related accessories can support equipment organization and management in operating rooms and other professional clinical environments. A clamp may be used to secure compatible tubing or materials when the instrument is specifically designed and approved for that purpose.

The intended use of this particular model should be confirmed with the manufacturer. It should not be assumed to be suitable for occluding fluid lines, clamping delicate medical tubing, or handling patient-connected lines unless its design and instructions explicitly support that application.

Selecting the correct instrument requires attention to tubing diameter, material, required holding force, and the risk of damage from compression. Clinical staff should follow facility protocols and the manufacturer's guidance when using the clamp.

Size and Jaw Opening

The stated 5-inch overall length is approximately 12.7 cm. The specified jaw opening is 1.2 cm, or 12 mm. These measurements provide a useful starting point for comparing the instrument with other available models.

Jaw opening alone does not establish the maximum compatible tubing diameter. The effective capacity depends on how the jaws are shaped and how the clamp closes. Confirm the manufacturer's dimensional drawing or technical specifications before ordering for a specific tubing application.

Material and Construction

The product title does not identify the material composition. Surgical clamps are commonly manufactured from medical-grade stainless steel, but the exact alloy, finish, and construction of this model must be confirmed with the supplier.

For professional instrument procurement, material quality and mechanical reliability are important considerations. Buyers should verify the manufacturer's documentation, including the intended use, jaw specifications, and any applicable quality requirements.

Handling and Inspection

Before use, inspect the jaws for alignment, damage, wear, or corrosion. Check the closure mechanism and any locking feature, if present, according to the manufacturer's instructions. Ensure that the clamp grips the intended material without causing unacceptable deformation or damage.

A clamp that does not close correctly or shows visible defects should be removed from service for evaluation. The instrument should only be used for applications supported by its intended-use documentation.

Cleaning and Sterilization

Cleaning and sterilization requirements depend on the instrument's construction and approved use. Follow the manufacturer's validated instructions and the healthcare facility's approved reprocessing procedures. Pay attention to the jaw surfaces, joints, and any locking mechanism where residue may accumulate.

Before clinical use, confirm whether the instrument is reusable and whether it is compatible with the facility's intended sterilization method. Do not assume that every tubing or towel clamp is designed for repeated sterilization or for direct contact with patient-connected tubing.

Selecting the Appropriate Tubing Towel Clamp

When purchasing the 5″ Tubing Towel Clamp with 1.2 cm Jaw Opening, verify the overall length, jaw opening, jaw design, intended tubing compatibility, material composition, and reprocessing requirements. These details help ensure that the selected instrument matches the intended application and facility protocols.

Key Features

• Tubing towel clamp configuration

• Stated overall length of 5 inches

• Jaw opening of 1.2 cm (12 mm)

• Compact size for surgical support tasks

• Intended for compatible tubing or materials, subject to manufacturer specifications

• Jaw capacity to be verified before use

• Material composition to be confirmed with the supplier

• Closure and locking mechanism to be checked against product specifications

• Inspect for jaw alignment and mechanical defects before use

• Reprocessing according to validated manufacturer instructions

Product Specifications

Frequently Asked Questions

1. What is a 5″ Tubing Towel Clamp used for?

It is intended to secure compatible tubing or materials in applications supported by the manufacturer's instructions. Confirm the approved use before applying it to medical tubing.

2. What is the jaw opening of this clamp?

The stated jaw opening is 1.2 cm, equivalent to 12 mm.

3. How long is the Tubing Towel Clamp?

The stated overall length is 5 inches, approximately 12.7 cm.

4. Does a 1.2 cm jaw opening mean it fits 12 mm tubing?

Not necessarily. Jaw opening and compatible tubing diameter are not always identical. Check the jaw geometry and the manufacturer's recommended tubing range.

5. Can this clamp be used to stop fluid flow through medical tubing?

Do not assume that it is suitable for flow occlusion. Use it for that purpose only if the manufacturer explicitly approves the application and the facility's protocol permits it.

6. What material is this clamp made from?

The exact material is not specified in the product title. Confirm the alloy and finish with the manufacturer or supplier.

7. How should the clamp be cleaned and sterilized?

Follow the manufacturer's validated reprocessing instructions. Confirm reusable status and approved sterilization methods before clinical use.

8. What should I verify before purchasing this clamp?

Confirm the 5-inch length, 1.2 cm jaw opening, jaw design, intended tubing compatibility, material, closure mechanism, and reprocessing requirements.