5.5″ Gregory Femoral Artery Clamp Curved Right (Copy)

The 5.5″ Gregory Femoral Artery Clamp Curved Right is a specialized vascular surgical instrument designed for use in procedures requiring controlled engagement with blood vessels. Featuring a 5.5-inch overall length and a right-curved configuration, this instrument offers a compact profile for professional surgical environments where access, positioning, and instrument control are important.

Design and Configuration

The defining characteristic of the Gregory Femoral Artery Clamp is its right-curved working end. This configuration allows the instrument to approach selected anatomical structures at an angle, depending on the surgical technique and operative field. Compared with a straight vascular clamp, a curved design may provide improved access in situations where direct alignment with the target structure is limited.

The 5.5-inch length provides a compact instrument profile suitable for localized surgical work. The instrument's working geometry and mechanical operation should be evaluated according to the manufacturer's specifications to ensure that it is appropriate for the intended application.

Surgical Applications

The Gregory Femoral Artery Clamp Curved Right belongs to the vascular surgical instrument category. It may be considered for selected procedures involving femoral vessel exposure and vascular management, subject to the instrument's validated intended use.

Femoral artery procedures require careful handling because this vessel supplies blood to the lower extremity. Instrument selection depends on the surgical approach, the anatomical structures involved, and the requirements of the procedure. The right-curved pattern provides an alternative to straight or left-curved clamp designs, allowing trained surgical professionals to choose a configuration suited to their operative needs.

This instrument should only be used by qualified healthcare professionals who understand its design, intended application, and appropriate handling requirements.

Material and Construction

The exact material composition of this specific product should be confirmed with the manufacturer or supplier. Surgical vascular clamps are commonly manufactured from medical-grade stainless steel because of its strength, corrosion resistance, and suitability for validated medical instrument reprocessing.

Manufacturing quality, jaw alignment, and mechanical performance are important considerations when selecting a vascular clamp. Buyers should confirm the material grade and applicable quality documentation before purchasing the instrument for clinical use.

Handling and Usability

The compact 5.5-inch design supports handling in localized operative fields. The right-curved profile provides a distinct working angle that may help with instrument positioning when the surgical approach requires an angled configuration.

Before use, inspect the instrument for proper jaw alignment, smooth mechanical action, surface damage, and corrosion. Any instrument showing irregular operation or visible defects should be removed from service for evaluation. Proper handling and routine inspection help maintain instrument condition and support consistent performance.

Cleaning and Sterilization

Cleaning and sterilization must follow the manufacturer's validated instructions and the healthcare facility's approved reprocessing procedures. After use, remove contamination promptly and pay particular attention to joints or moving components where debris may accumulate. The instrument should be thoroughly inspected after cleaning and before sterilization.

Do not assume that a particular sterilization method or reusable status applies without manufacturer confirmation. Appropriate reprocessing helps preserve instrument integrity and supports established infection-prevention practices.

Selecting the Right Vascular Clamp

When purchasing the 5.5″ Gregory Femoral Artery Clamp Curved Right, verify its overall length, direction of curvature, jaw design, material specifications, and intended clinical application. Comparing these characteristics with the requirements of the surgical instrument inventory helps distinguish this model from alternative femoral artery clamps.

With its compact length and right-curved configuration, this instrument is a specialized option for professional vascular surgical instrument collections. Confirming the manufacturer's specifications before purchase helps ensure that the selected instrument meets the needs of the intended clinical setting.

Key Features

• Specialized Gregory femoral artery clamp design

• 5.5-inch overall instrument length

• Right-curved jaw configuration

• Intended for selected vascular surgical applications

• Compact profile for localized operative fields

• Angled working end for appropriate instrument positioning

• Common instrument category for vascular surgery

• Medical-grade stainless steel construction should be verified with the supplier

• Requires inspection before clinical use

• Cleaning and sterilization according to manufacturer instructions

Product Specifications

Frequently Asked Questions

1. What is a Gregory Femoral Artery Clamp Curved Right used for?

It is a specialized vascular surgical instrument intended for selected procedures involving blood vessels. Its exact application depends on the manufacturer's intended-use specifications.

2. What is the overall length of this Gregory clamp?

The stated overall length is 5.5 inches, approximately 14 cm.

3. What does curved right mean in a femoral artery clamp?

It describes the direction of the instrument's curvature, which affects its approach and positioning within the operative field.

4. What material is used for this vascular clamp?

Vascular clamps are commonly manufactured from medical-grade stainless steel. The precise material grade for this product should be confirmed with the supplier.

5. How should this surgical clamp be sterilized?

Follow the manufacturer's validated cleaning and sterilization instructions and the healthcare facility's approved reprocessing procedures.

6. How can I check the quality of a femoral artery clamp?

Inspect jaw alignment, mechanical operation, surface condition, and any signs of corrosion or damage. Confirm the manufacturer's specifications and quality documentation before clinical use.

7. How does a curved clamp differ from a straight clamp?

A curved clamp has an angled working profile that may facilitate access from a particular direction, while a straight clamp has a linear working profile. The appropriate design depends on the procedure and intended application.