6″ Micro Needle Holders Curved 0.4mm Tips
Direct Manufacturer Pricing • Tax Exclusive
- 6″ Micro Needle Holders designed with a curved configuration for microsuturing.
- 0.4 mm curved tip size provides a defined grasping profile for ENT procedures.
- Curved design supports a specialized working orientation within the operative field.
- Suitable for ENT and microsurgery applications requiring a curved needle holder.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 6″ Micro Needle Holders is a specialized ENT instrument designed for delicate microsuturing in otologic and fine surgical procedures. Its ultra-fine 0.4 mm curved tips provide a distinct working orientation that can assist with positioning the tips within the operative field.
With an overall length of 6 inches and an 8 mm handle, this needle holder provides a defined grasping profile for ENT applications. The curved design allows the working end to approach anatomical targets from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 6-inch overall length for controlled manual handling.
- 0.4 mm tip size provides a defined grasping profile.
- Curved configuration for specialized working orientation.
- Designed for delicate microsuturing and fine surgical procedures.
- Suitable for ENT applications.
- Supports positioning of the working end within the operative field.
- Specialized Micro Needle Holder pattern for professional ENT instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Micro Needle Holders |
| Overall Length | 6″ |
| Working End / Blade / Jaw | 0.4 mm Curved Tips |
| Configuration | Curved |
| Primary Function | Microsuturing |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | ENT |
The 6″ Micro Needle Holders combines a 6-inch overall length with a 0.4 mm tip size and curved configuration.
Its defined working profile is intended for microsuturing in ENT applications.
Design & Function
The Micro Needle Holders features a curved working configuration designed to provide a specialized orientation during microsuturing. The curved tip design can assist in positioning the working end according to the requirements of the operative field.
The 0.4 mm tip size provides a defined grasping profile, while the 6-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for ENT procedures requiring a curved needle holder.
Surgical Applications
The 6″ Micro Needle Holders may be used for ENT and microsurgery applications involving delicate suturing tasks. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the Micro Needle Holders before use, paying particular attention to the working end and tip alignment. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the Micro Needle Holders appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Micro Needle Holder?
The overall length is 6 inches.
2. What is the working end / blade or tip design of the instrument?
It features 0.4 mm curved tips.
3. Is this Micro Needle Holder curved or straight?
It features a curved configuration.
4. What is a Micro Needle Holder used for?
It is designed for controlled microsuturing in ENT applications.
5. What clinical advantage does the curved design provide?
The curved design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for ENT surgery?
It may be used in ENT and microsurgery applications where a curved needle holder is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Micro Needle Holder be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.