6 3/4″ Subscapularis Spreader Angled
Direct Manufacturer Pricing • Tax Exclusive
- 6 3/4″ Subscapularis Spreader Angled designed with an angled configuration for controlled exposure.
- Angled design provides a defined exposure profile for orthopedic procedures.
- Angled design supports a specialized working orientation within the operative field.
- Suitable for orthopedic and shoulder surgery applications requiring an angled instrument type.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 6 3/4″ Subscapularis Spreader Angled is a specialized orthopedic instrument designed for controlled exposure of the subscapularis muscle during shoulder surgery. Its angled design improves access and visibility while minimizing tissue stress.
With an overall length of 6 3/4 inches and a compact design, this spreader provides a defined exposure profile for orthopedic applications. The angled configuration allows the working end to approach the anatomical target from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 6 3/4-inch overall length for controlled manual handling.
- Angled design optimized for subscapularis exposure.
- Smooth, atraumatic surfaces for gentle tissue handling.
- Designed for controlled exposure during shoulder surgery.
- Suitable for orthopedic and shoulder surgery applications.
- Supports positioning of the working end within the operative field.
- Specialized subscapularis pattern for professional orthopedic instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Subscapularis Spreader |
| Overall Length | 6 3/4″ |
| Working End / Blade / Jaw | Angled design |
| Configuration | Angled |
| Primary Function | Controlled Exposure |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Orthopedic / Shoulder Surgery |
The 6 3/4″ Subscapularis Spreader Angled combines a 6 3/4-inch overall length with an angled design.
Its defined working profile is intended for controlled exposure in orthopedic applications.
Design & Function
The Subscapularis Spreader features an angled working configuration designed to provide a specialized orientation during shoulder surgery. The angled design can assist in positioning the working end according to the requirements of the operative field.
The angled design provides a defined exposure profile, while the 6 3/4-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for orthopedic procedures requiring an angled instrument type.
Surgical Applications
The 6 3/4″ Subscapularis Spreader Angled may be used for orthopedic and shoulder surgery applications involving controlled exposure of the subscapularis muscle. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the subscapularis spreader before use, paying particular attention to the working end and alignment. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the subscapularis spreader appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Subscapularis Spreader?
The overall length is 6 3/4 inches.
2. What is the working end / blade or tip design of the instrument?
It features angled design.
3. Is this Subscapularis Spreader curved or straight?
It features an angled configuration.
4. What is a Subscapularis Spreader used for?
It is designed for controlled exposure in orthopedic applications.
5. What clinical advantage does the angled design provide?
The angled design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for orthopedic surgery?
It may be used in orthopedic and shoulder surgery applications where an angled spreader is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Subscapularis Spreader be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.