7″ Impactor Micro Offset 4.3 × 10mm
Direct Manufacturer Pricing • Tax Exclusive
- 7″ Impactor Micro Offset 4.3 × 10mm designed with an offset configuration for delicate impacting.
- 4.3 × 10mm impact face provides a defined impacting profile for orthopedic procedures.
- Offset design supports a specialized working orientation within the operative field.
- Suitable for orthopedic and surgical applications requiring an offset Impactor.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 7″ Impactor Micro Offset 4.3 × 10mm is a specialized orthopedic instrument designed for delicate procedures requiring angled access and fine control. Its offset head improves visibility and precision in restricted anatomical areas.
With an overall length of 7 inches and a 4.3 × 10mm impact face, this Impactor provides a defined impact profile for orthopedic applications. The compact design allows the working end to approach anatomical targets from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 7-inch overall length for controlled manual handling.
- 4.3 × 10mm impact face provides a defined impact profile.
- Offset head configuration for specialized working orientation.
- Designed for delicate procedures requiring angled access.
- Suitable for orthopedic applications.
- Supports positioning of the working end within the operative field.
- Specialized Impactor pattern for professional orthopedic instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Imactor |
| Overall Length | 7″ |
| Working End / Blade / Jaw | 4.3 × 10mm impact face |
| Configuration | Offset |
| Primary Function | Delicate Impacting |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Orthopedic |
The 7″ Impactor Micro Offset 4.3 × 10mm combines a 7-inch overall length with a 4.3 × 10mm impact face and offset configuration.
Its defined working profile is intended for delicate impacting in orthopedic applications.
Design & Function
The Impactor features an offset working configuration designed to provide a specialized orientation during delicate procedures. The offset head design can assist in positioning the working end according to the requirements of the operative field.
The 4.3 × 10mm impact face provides a defined impacting profile, while the 7-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for orthopedic procedures requiring an offset instrument type.
Surgical Applications
The 7″ Impactor Micro Offset 4.3 × 10mm may be used for orthopedic and surgical applications involving delicate impacting actions. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the Impactor before use, paying particular attention to the working end and alignment. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the Impactor appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Impactor?
The overall length is 7 inches.
2. What is the working end / blade or tip design of the instrument?
It features 4.3 × 10mm impact face.
3. Is this Impactor curved or straight?
It features an offset configuration.
4. What is an Impactor used for?
It is designed for controlled delicate impacting in orthopedic applications.
5. What clinical advantage does the offset design provide?
The offset design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for orthopedic surgery?
It may be used in orthopedic and surgical applications where an offset Impactor is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Impactor be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.