7 1/4″ Swedish Bone Curette 5mm Oval
Direct Manufacturer Pricing • Tax Exclusive
- 7 1/4″ Swedish Bone Curette 5mm Oval designed with an oval configuration for controlled bone removal and debridement.
- 5 mm working width provides a defined scraping profile for orthopedic procedures.
- Oval design supports a specialized working orientation within the operative field.
- Suitable for orthopedic and general surgery applications requiring an oval curette.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 7 1/4″ Swedish Bone Curette 5mm Oval is a specialized orthopedic instrument designed for controlled bone removal and debridement. Its oval 5mm working end provides a distinct working orientation that can assist with positioning the scraping tip within the operative field.
With an overall length of 7 1/4 inches and a 5mm working width, this curette provides a defined scraping profile for orthopedic applications. The smooth internal cutting surface allows the working end to approach bone from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 7 1/4-inch overall length for controlled manual handling.
- 5 mm working width provides a defined scraping profile.
- Oval configuration for specialized working orientation.
- Designed for controlled bone removal and debridement.
- Suitable for orthopedic and general surgical applications.
- Supports positioning of the working end within the operative field.
- Specialized Swedish pattern for professional orthopedic instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Swedish Bone Curette |
| Overall Length | 7 1/4″ |
| Working End / Blade / Jaw | 5 mm Oval |
| Configuration | Oval |
| Primary Function | Bone Removal and Debridement |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Orthopedic / General Surgery |
The 7 1/4″ Swedish Bone Curette 5mm Oval combines a 7 1/4-inch overall length with a 5 mm working width and oval configuration.
Its defined working profile is intended for controlled bone removal and debridement in orthopedic applications.
Design & Function
The Swedish Bone Curette features an oval working configuration designed to provide a specialized orientation during bone preparation. The oval working end design can assist in positioning the scraping end according to the requirements of the operative field.
The 5 mm working width provides a defined scraping profile, while the 7 1/4-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for orthopedic procedures requiring an oval curette.
Surgical Applications
The 7 1/4″ Swedish Bone Curette 5mm Oval may be used for orthopedic and general surgery applications involving controlled bone removal and debridement. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the Swedish Bone Curette before use, paying particular attention to the working end, jaw alignment, and cutting edges. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the Swedish Bone Curette appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Curette?
The overall length is 7 1/4 inches.
2. What is the working end / blade or tip design of the instrument?
It features 5 mm Oval.
3. Is this Curette curved or straight?
It features an oval configuration.
4. What is a Curette used for?
It is designed for controlled bone removal and debridement in orthopedic applications.
5. What clinical advantage does the oval design provide?
The oval design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for orthopedic surgery?
It may be used in orthopedic and general surgery applications where an oval curette is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Curette be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.