7 3/8″ Diamond Surface Rasp Flat Straight
Direct Manufacturer Pricing • Tax Exclusive
- 7 3/8″ Diamond Surface Rasp Flat Straight designed with a straight configuration for precise bone contouring and reshaping.
- Flat working end provides a defined rasping profile for ENT procedures.
- Straight design supports a specialized working orientation within the operative field.
- Suitable for ENT and rhinoplasty applications requiring a straight rasping instrument.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 7 3/8″ Diamond Surface Rasp Flat Straight is a specialized ENT instrument designed for precise bone contouring and reshaping. Its diamond-patterned surface provides superior abrasion efficiency, allowing smooth, controlled removal of cartilage or bone while minimizing unintended trauma.
With an overall length of 7 3/8 inches and a flat, straight design, this rasp provides a defined rasping profile for ENT applications. The flat shaft enables predictable rasping in narrow or confined areas, ensuring consistent and professional outcomes during procedures.
Key Features
- 7 3/8-inch overall length for controlled manual handling.
- Flat working end provides a defined rasping profile.
- Straight configuration for specialized working orientation.
- Designed for precise bone contouring and reshaping.
- Suitable for ENT applications including rhinoplasty and septoplasty.
- Supports positioning of the working end within the operative field.
- Specialized diamond surface for professional ENT instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Diamond Surface Rasp |
| Overall Length | 7 3/8″ |
| Working End / Blade / Jaw | Flat Surface |
| Configuration | Straight |
| Primary Function | Bone Contouring and Reshaping |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | ENT / Rhinoplasty |
The 7 3/8″ Diamond Surface Rasp Flat Straight combines a 7 3/8-inch overall length with a flat working end and straight configuration.
Its defined working profile is intended for precise bone contouring and reshaping in ENT applications.
Design & Function
The Diamond Surface Rasp features a straight working configuration designed to provide a specialized orientation during bone contouring procedures. The flat working end design can assist in positioning the rasp according to the requirements of the operative field.
The flat surface provides a defined rasping profile, while the 7 3/8-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for ENT procedures requiring a straight rasping instrument.
Surgical Applications
The 7 3/8″ Diamond Surface Rasp Flat Straight may be used for ENT and rhinoplasty applications involving precise bone contouring and reshaping. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the diamond surface rasp before use, paying particular attention to the working end and surface condition. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the diamond surface rasp appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Diamond Surface Rasp?
The overall length is 7 3/8 inches.
2. What is the working end / blade or tip design of the instrument?
It features a flat surface.
3. Is this Diamond Surface Rasp curved or straight?
It features a straight configuration.
4. What is a Diamond Surface Rasp used for?
It is designed for controlled bone contouring and reshaping in ENT applications.
5. What clinical advantage does the flat design provide?
The flat design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for ENT surgery?
It may be used in ENT and rhinoplasty applications where a straight rasping instrument is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Diamond Surface Rasp be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.