7″ In-Situ Bypass Hooks Angled 2mm No Ball Tip
Direct Manufacturer Pricing • Tax Exclusive
- 7″ In-Situ Bypass Hooks Angled 2mm No Ball Tip designed with an angled configuration for controlled manipulation and positioning.
- 2 mm working tip provides a defined manipulation profile for cardiovascular procedures.
- Angled design supports a specialized working orientation within the operative field.
- Suitable for cardiovascular and surgical applications requiring an angled instrument type.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 7″ In-Situ Bypass Hooks Angled 2mm No Ball Tip is a specialized cardiovascular instrument designed for controlled manipulation, positioning, and access during procedures where precision is essential. Its angled 2mm working tip provides a distinct working orientation that can assist with positioning the working end within the operative field.
With an overall length of 7 inches and a 2mm working tip, this bypass hook provides a focused instrument profile for working around anatomical structures and within restricted surgical fields. The angled configuration allows the working end to approach tissue and structures from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 7-inch overall length for controlled manual handling.
- 2 mm working tip provides a defined manipulation profile.
- Angled configuration for specialized working orientation.
- Designed for controlled manipulation and positioning.
- Suitable for cardiovascular applications.
- Supports positioning of the working end within the operative field.
- Specialized In-Situ pattern for professional cardiovascular instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | In-Situ Bypass Hooks |
| Overall Length | 7″ |
| Working End / Blade / Jaw | 2 mm working tip |
| Configuration | Angled |
| Primary Function | Controlled Manipulation and Positioning |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Cardiovascular |
The 7″ In-Situ Bypass Hooks Angled 2mm No Ball Tip combines a 7-inch overall length with a 2 mm working tip and angled configuration.
Its defined working profile is intended for controlled manipulation and positioning in cardiovascular applications.
Design & Function
The In-Situ Bypass Hooks feature an angled working configuration designed to provide a specialized orientation during cardiovascular procedures. The angled working end design can assist in positioning the working end according to the requirements of the operative field.
The 2 mm working tip provides a defined manipulation profile, while the 7-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for cardiovascular procedures requiring an angled instrument type.
Surgical Applications
The 7″ In-Situ Bypass Hooks Angled 2mm No Ball Tip may be used for cardiovascular and surgical applications involving controlled manipulation and positioning. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the In-Situ Bypass Hooks before use, paying particular attention to the working end and tip alignment. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the In-Situ Bypass Hooks appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this In-Situ Bypass Hook?
The overall length is 7 inches.
2. What is the working end / blade or tip design of the instrument?
It features 2 mm working tip.
3. Is this In-Situ Bypass Hook angled or straight?
It features an angled configuration.
4. What is an In-Situ Bypass Hook used for?
It is designed for controlled manipulation and positioning in cardiovascular applications.
5. What clinical advantage does the angled design provide?
The angled design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for cardiovascular surgery?
It may be used in cardiovascular and surgical applications where an angled In-Situ Bypass Hook is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the In-Situ Bypass Hook be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.