8 1/2″ Impactor Wide 10 × 13mm
Direct Manufacturer Pricing • Tax Exclusive
- 8 1/2″ Impactor designed with a wide configuration for seating implants and compacting bone.
- 10 × 13 mm wide face provides a defined impact profile for orthopedic procedures.
- Wide design supports a specialized working orientation within the operative field.
- Suitable for orthopedic and surgical applications requiring a wide impactor.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 8 1/2″ Impactor is a specialized orthopedic instrument designed for even force distribution during the seating of implants or compacting bone. Its wide impact surface provides a distinct working orientation that can assist with positioning the working end within the operative field.
With an overall length of 8 1/2 inches and a 10 × 13 mm wide face size, this Impactor provides a defined impact profile for orthopedic applications. The ergonomic design allows the working end to approach the anatomical target from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 8 1/2-inch overall length for controlled manual handling.
- 10 × 13 mm wide face size provides a defined impact profile.
- Wide impact surface for even force distribution.
- Designed for reduced risk of bone damage.
- Suitable for orthopedic applications.
- Supports positioning of the working end within the operative field.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Imactor |
| Overall Length | 8 1/2″ |
| Working End / Blade / Jaw | 10 × 13 mm wide face |
| Configuration | Wide |
| Primary Function | Seating Implants and Compacting Bone |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Orthopedic |
The 8 1/2″ Impactor combines an 8 1/2-inch overall length with a 10 × 13 mm wide face size and wide configuration.
Its defined impact profile is intended for seating implants and compacting bone in orthopedic applications.
Design & Function
The Impactor features a wide working configuration designed to provide a specialized orientation during orthopedic procedures. The wide face design can assist in positioning the working end according to the requirements of the operative field.
The 10 × 13 mm wide face provides a defined impact profile, while the 8 1/2-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for orthopedic procedures requiring a wide impactor.
Surgical Applications
The 8 1/2″ Impactor may be used for orthopedic and surgical applications involving the seating of implants and compacting bone. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the Impactor before use, paying particular attention to the working end and face alignment. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the Impactor appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Impactor?
The overall length is 8 1/2 inches.
2. What is the working end / blade or tip design of the instrument?
It features 10 × 13 mm wide face.
3. Is this Impactor curved or straight?
It features a wide configuration.
4. What is an Impactor used for?
It is designed for controlled seating of implants and compacting bone in orthopedic applications.
5. What clinical advantage does the wide face provide?
The wide face provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for orthopedic surgery?
It may be used in orthopedic and surgical applications where a wide impactor is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Impactor be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.