8 1/2″ Impactor Offset 6.5 × 11.5mm
Direct Manufacturer Pricing • Tax Exclusive
- 8 1/2″ Impactor Offset 6.5 × 11.5mm designed with an offset configuration for accurate force transmission.
- 6.5 × 11.5mm face size provides a defined impacting profile for orthopedic procedures.
- Offset design supports a specialized working orientation within the operative field.
- Suitable for orthopedic and surgical applications requiring an offset Impactor.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 8 1/2″ Impactor Offset 6.5 × 11.5mm is a specialized orthopedic instrument designed for improving visibility and reach around anatomical obstacles during surgical procedures. Its offset head provides a distinct working orientation that can assist with positioning the working end within the operative field.
With an overall length of 8 1/2 inches and a face size of 6.5 × 11.5mm, this Impactor provides a defined impact profile for orthopedic applications. The ergonomic design allows the working end to approach anatomical targets from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 8 1/2-inch overall length for controlled manual handling.
- 6.5 × 11.5mm face size provides a defined impact profile.
- Offset head configuration for specialized working orientation.
- Designed for accurate force transmission during procedures.
- Suitable for orthopedic and surgical applications requiring angled access.
- Supports positioning of the working end within the operative field.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Imactor |
| Overall Length | 8 1/2″ |
| Working End / Blade / Jaw | 6.5 × 11.5mm Offset Head |
| Configuration | Offset |
| Primary Function | Impacting |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Orthopedic |
The 8 1/2″ Impactor Offset 6.5 × 11.5mm combines a 8 1/2-inch overall length with a 6.5 × 11.5mm face size and offset configuration.
Its defined working profile is intended for impacting in orthopedic applications.
Design & Function
The Impactor features an offset working configuration designed to provide a specialized orientation during orthopedic procedures. The offset head design can assist in positioning the working end according to the requirements of the operative field.
The 6.5 × 11.5mm face size provides a defined impacting profile, while the 8 1/2-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for orthopedic procedures requiring an offset instrument type.
Surgical Applications
The 8 1/2″ Impactor Offset 6.5 × 11.5mm may be used for orthopedic and surgical applications involving impacting actions. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the Impactor before use, paying particular attention to the working end and alignment. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the Impactor appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Impactor?
The overall length is 8 1/2 inches.
2. What is the working end / blade or tip design of the instrument?
It features 6.5 × 11.5mm Offset Head.
3. Is this Impactor curved or straight?
It features an Offset configuration.
4. What is an Impactor used for?
It is designed for controlled impacting in orthopedic applications.
5. What clinical advantage does the offset design provide?
The offset design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for orthopedic surgery?
It may be used in orthopedic and surgical applications where an offset Impactor is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Impactor be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.