8 1/2″ Impactor 7 × 12.5mm
Direct Manufacturer Pricing • Tax Exclusive
- 8 1/2″ Impactor 7 × 12.5mm designed with a straight configuration for controlled force application.
- 7 × 12.5 mm impact face provides a defined impact profile for orthopedic procedures.
- Straight design supports a specialized working orientation within the operative field.
- Suitable for orthopedic and bone surgery applications requiring a straight Impactor.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 8 1/2″ Impactor 7 × 12.5mm is a specialized orthopedic instrument designed for controlled force application during orthopedic and bone manipulation procedures. Its balanced length and precisely machined impact surface allow accurate seating of implants or bone fragments with minimal slippage.
With an overall length of 8 1/2 inches and a 7 × 12.5 mm impact face, this Impactor provides a defined impact profile for orthopedic applications. The smooth force transmission allows the working end to approach the anatomical target with precision, supporting controlled manual manipulation during procedures.
Key Features
- 8 1/2-inch overall length for controlled manual handling.
- 7 × 12.5 mm impact face provides a defined impact profile.
- Precision-machined configuration for specialized working orientation.
- Designed for controlled force application during orthopedic procedures.
- Suitable for orthopedic and bone surgery applications.
- Supports accurate seating of implants or bone fragments.
- Specialized Impactor pattern for professional orthopedic instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Imactor |
| Overall Length | 8 1/2″ |
| Working End / Blade / Jaw | 7 × 12.5 mm impact face |
| Configuration | Straight |
| Primary Function | Force Application |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Orthopedic / Bone Surgery |
The 8 1/2″ Impactor 7 × 12.5mm combines an 8 1/2-inch overall length with a 7 × 12.5 mm impact face and straight configuration.
Its defined working profile is intended for controlled force application in orthopedic applications.
Design & Function
The Impactor features a straight working configuration designed to provide a specialized orientation during bone manipulation. The precision-machined impact face can assist in positioning the working end according to the requirements of the operative field.
The 7 × 12.5 mm impact face provides a defined impact profile, while the 8 1/2-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for orthopedic procedures requiring a straight instrument type.
Surgical Applications
The 8 1/2″ Impactor 7 × 12.5mm may be used for orthopedic and bone surgery applications involving controlled force application. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the Impactor before use, paying particular attention to the impact face and alignment. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the Impactor appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Impactor?
The overall length is 8 1/2 inches.
2. What is the working end / blade or tip design of the instrument?
It features 7 × 12.5 mm impact face.
3. Is this Impactor curved or straight?
It features a Straight configuration.
4. What is an Impactor used for?
It is designed for controlled force application in orthopedic applications.
5. What clinical advantage does the precision-machined impact face provide?
The impact face provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for orthopedic surgery?
It may be used in orthopedic and bone surgery applications where a straight Impactor is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Impactor be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.