9 1/2″ Hibbs Endura-Cut Osteotome 3/4″ Curved
Direct Manufacturer Pricing • Tax Exclusive
- 9 1/2″ Hibbs Endura-Cut Osteotome 3/4″ Curved designed with a curved configuration for controlled bone cutting and shaping.
- 3/4 inch cutting surface provides a defined cutting profile for orthopedic procedures.
- Curved design supports a specialized working orientation within the operative field.
- Suitable for orthopedic and spinal surgery applications requiring a curved osteotome.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 9 1/2″ Hibbs Endura-Cut Osteotome 3/4″ Curved is a specialized orthopedic instrument designed for controlled bone cutting, shaping, and preparation. Its wide cutting edge and anatomical curvature provide a distinct working orientation that can assist with positioning the cutting end within the operative field.
With an overall length of 9 1/2 inches and a 3/4 inch cutting surface, this osteotome provides a defined cutting profile for orthopedic applications. The curved design allows the working end to approach bone from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 9 1/2-inch overall length for controlled manual handling.
- 3/4 inch cutting surface provides a defined cutting profile.
- Curved configuration for specialized working orientation.
- Designed for controlled bone cutting and shaping.
- Suitable for orthopedic and spinal surgery applications.
- Supports positioning of the working end within the operative field.
- Specialized Hibbs pattern for professional orthopedic instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Hibbs Endura-Cut Osteotome |
| Overall Length | 9 1/2″ |
| Working End / Blade / Jaw | 3/4 inch Cutting Surface |
| Configuration | Curved |
| Primary Function | Bone Cutting and Shaping |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Orthopedic / Spinal Surgery |
The 9 1/2″ Hibbs Endura-Cut Osteotome 3/4″ Curved combines a 9 1/2-inch overall length with a 3/4 inch cutting surface and curved configuration.
Its defined working profile is intended for controlled bone cutting and shaping in orthopedic applications.
Design & Function
The Hibbs Endura-Cut Osteotome features a curved working configuration designed to provide a specialized orientation during bone preparation. The cutting edge design can assist in positioning the working end according to the requirements of the operative field.
The 3/4 inch cutting surface provides a defined cutting profile, while the 9 1/2-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for orthopedic procedures requiring a curved osteotome.
Surgical Applications
The 9 1/2″ Hibbs Endura-Cut Osteotome 3/4″ Curved may be used for orthopedic and spinal surgery applications involving controlled bone cutting and shaping. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the Hibbs Endura-Cut Osteotome before use, paying particular attention to the working end, jaw alignment, and cutting edges. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the Hibbs Endura-Cut Osteotome appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Osteotome?
The overall length is 9 1/2 inches.
2. What is the working end / blade or tip design of the instrument?
It features 3/4 inch cutting surface.
3. Is this Osteotome curved or straight?
It features a curved configuration.
4. What is a Hibbs Endura-Cut Osteotome used for?
It is designed for controlled bone cutting and shaping in orthopedic applications.
5. What clinical advantage does the curved design provide?
The curved design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for orthopedic surgery?
It may be used in orthopedic and spinal surgery applications where a curved osteotome is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Osteotome be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.