9 1/4″ Ostrum Punch 3x7mm Jaws Shaft
Direct Manufacturer Pricing • Tax Exclusive
- 9 1/4″ Ostrum Punch 3x7mm Jaws Shaft designed with a straight configuration for precise bone and cartilage removal.
- 3x7mm jaw dimension provides a defined cutting profile for ENT procedures.
- Straight design supports a specialized working orientation within the operative field.
- Suitable for ENT and craniofacial surgery applications requiring a straight punch.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 9 1/4″ Ostrum Punch 3x7mm Jaws Shaft is a specialized ENT instrument designed for precise bone and cartilage removal in craniofacial procedures. Its 3x7mm jaws provide a distinct working orientation that can assist with positioning the cutting end within the operative field.
With an overall length of 9 1/4 inches and a 3x7mm jaw dimension, this punch provides a defined cutting profile for ENT applications. The straight design allows the working end to approach anatomical targets from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 9 1/4-inch overall length for controlled manual handling.
- 3x7mm jaw dimension provides a defined cutting profile.
- Straight configuration for specialized working orientation.
- Designed for precise bone and cartilage removal.
- Suitable for ENT and craniofacial surgery applications.
- Supports positioning of the working end within the operative field.
- Specialized Ostrum pattern for professional ENT instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Ostrum Punch |
| Overall Length | 9 1/4″ |
| Working End / Blade / Jaw | 3x7mm Jaws |
| Configuration | Straight |
| Primary Function | Bone and Cartilage Removal |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | ENT / Craniofacial Surgery |
The 9 1/4″ Ostrum Punch 3x7mm Jaws Shaft combines a 9 1/4-inch overall length with a 3x7mm jaw dimension and straight configuration.
Its defined working profile is intended for precise bone and cartilage removal in ENT applications.
Design & Function
The Ostrum Punch features a straight working configuration designed to provide a specialized orientation during bone and cartilage removal. The jaw design can assist in positioning the working end according to the requirements of the operative field.
The 3x7mm jaw profile provides a defined cutting profile, while the 9 1/4-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for ENT procedures requiring a straight instrument type.
Surgical Applications
The 9 1/4″ Ostrum Punch 3x7mm Jaws Shaft may be used for ENT and craniofacial surgery applications involving precise bone and cartilage removal. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the Ostrum Punch before use, paying particular attention to the working end, jaw alignment, and cutting edges. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the Ostrum Punch appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Ostrum Punch?
The overall length is 9 1/4 inches.
2. What is the working end / blade or tip design of the instrument?
It features 3x7mm jaws.
3. Is this Ostrum Punch curved or straight?
It features a Straight configuration.
4. What is an Ostrum Punch used for?
It is designed for controlled bone and cartilage removal in ENT applications.
5. What clinical advantage does the straight design provide?
The straight design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for ENT surgery?
It may be used in ENT and craniofacial applications where a straight punch is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Ostrum Punch be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.