9″ Hajek Kofler Thru-Cutting Punch 2x3mm Jaws
Direct Manufacturer Pricing • Tax Exclusive
- 9″ Hajek Kofler Thru-Cutting Punch 2x3mm Jaws designed with a thru-cutting configuration for controlled cartilage excision.
- 2×3 mm jaw size provides a defined cutting profile for ENT procedures.
- Thru-cutting design supports a specialized working orientation within the operative field.
- Suitable for ENT and nasal surgery applications requiring a thru-cutting instrument.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 9″ Hajek Kofler Thru-Cutting Punch 2x3mm Jaws is a specialized ENT instrument designed for controlled intranasal and septal cartilage excision. Its 2×3mm jaws provide a distinct working orientation that can assist with positioning the cutting end within the operative field.
With an overall length of 9 inches and a 2×3 mm jaw size, this Thru-Cutting Punch provides a defined cutting profile for ENT applications. The thru-cutting design allows the working end to approach cartilage from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 9-inch overall length for controlled manual handling.
- 2×3 mm jaw size provides a defined cutting profile.
- Thru-cutting design for specialized working orientation.
- Designed for controlled cartilage excision.
- Suitable for ENT and nasal surgery applications.
- Supports positioning of the working end within the operative field.
- Specialized Hajek Kofler pattern for professional ENT instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Hajek Kofler Thru-Cutting Punch |
| Overall Length | 9″ |
| Working End / Blade / Jaw | 2×3 mm |
| Configuration | Thru-Cutting |
| Primary Function | Cartilage Excision |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | ENT / Nasal Surgery |
The 9″ Hajek Kofler Thru-Cutting Punch 2x3mm Jaws combines a 9-inch overall length with a 2×3 mm jaw size and thru-cutting design.
Its defined working profile is intended for controlled cartilage excision in ENT applications.
Design & Function
The Hajek Kofler Thru-Cutting Punch features a thru-cutting working configuration designed to provide a specialized orientation during cartilage excision. The jaw design can assist in positioning the cutting end according to the requirements of the operative field.
The 2×3 mm jaw profile provides a defined cutting profile, while the 9-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for ENT procedures requiring a thru-cutting instrument.
Surgical Applications
The 9″ Hajek Kofler Thru-Cutting Punch 2x3mm Jaws may be used for ENT and nasal surgery applications involving controlled cartilage excision. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the Hajek Kofler Thru-Cutting Punch before use, paying particular attention to the working end, jaw alignment, and cutting edges. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the Hajek Kofler Thru-Cutting Punch appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Thru-Cutting Punch?
The overall length is 9 inches.
2. What is the working end / blade or tip design of the instrument?
It features 2×3 mm jaws.
3. Is this Thru-Cutting Punch curved or straight?
It features a thru-cutting configuration.
4. What is a Thru-Cutting Punch used for?
It is designed for controlled cartilage excision in ENT applications.
5. What clinical advantage does the thru-cutting design provide?
The thru-cutting design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for ENT surgery?
It may be used in ENT and nasal surgery applications where a thru-cutting instrument is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Thru-Cutting Punch be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.