7 1/4″ Air Injection Cannula 19ga Angled 7mm
Direct Manufacturer Pricing • Tax Exclusive
- 7 1/4″ Air Injection Cannula 19ga Angled 7mm designed with an angled configuration for controlled air injection.
- 19 ga with 7 mm angled tip provides a defined injection profile for ophthalmic procedures.
- Angled design supports a specialized working orientation within the operative field.
- Suitable for ophthalmic and ocular surgery applications requiring an angled instrument.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 7 1/4″ Air Injection Cannula 19ga Angled 7mm is a specialized ophthalmic instrument designed for controlled air injection into the anterior chamber during various ocular surgical procedures. Its angled design allows surgeons to deliver air precisely into targeted areas while maintaining clear visibility and comfortable hand positioning.
With an overall length of 7 1/4 inches and a 19-gauge diameter with a 7 mm angled tip, this cannula provides the optimal balance between fluid flow and delicate intraocular manipulation. The ergonomic design allows the working end to approach the anatomical target from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 7 1/4-inch overall length for controlled manual handling.
- 19-gauge diameter with 7 mm angled tip provides a defined injection profile.
- Angled configuration for specialized working orientation.
- Designed for controlled air injection into the anterior chamber.
- Suitable for ophthalmic and ocular surgery applications.
- Supports positioning of the working end within the operative field.
- Specialized Air Injection pattern for professional ophthalmic instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Air Injection Cannula |
| Overall Length | 7 1/4″ |
| Working End / Blade / Jaw | 19 ga with 7 mm angled tip |
| Configuration | Angled |
| Primary Function | Air Injection |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Ophthalmic / Ocular Surgery |
The 7 1/4″ Air Injection Cannula 19ga Angled 7mm combines a 7 1/4-inch overall length with a 19-gauge diameter and 7 mm angled tip.
Its defined working profile is intended for controlled air injection in ophthalmic applications.
Design & Function
The Air Injection Cannula features an angled working configuration designed to provide a specialized orientation during ocular procedures. The angled tip can assist in positioning the working end according to the requirements of the operative field.
The 19-gauge diameter and 7 mm angled tip provide a defined injection profile, while the 7 1/4-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for ophthalmic procedures requiring an angled instrument.
Surgical Applications
The 7 1/4″ Air Injection Cannula 19ga Angled 7mm may be used for ophthalmic and ocular surgery applications involving controlled air injection into the anterior chamber. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the Air Injection Cannula before use, paying particular attention to the working end and tip alignment. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the Air Injection Cannula appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Air Injection Cannula?
The overall length is 7 1/4 inches.
2. What is the working end / blade or tip design of the instrument?
It features 19 ga with 7 mm angled tip.
3. Is this Air Injection Cannula curved or straight?
It features an angled configuration.
4. What is an Air Injection Cannula used for?
It is designed for controlled air injection in ophthalmic applications.
5. What clinical advantage does the angled design provide?
The angled design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for ophthalmic surgery?
It may be used in ophthalmic and ocular surgery applications where an angled Air Injection Cannula is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Air Injection Cannula be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.