The Ball Dissector 3mm 90° Angled is a specialized surgical instrument intended for precise tissue dissection and manipulation in suitable neurosurgical procedures. Ball-ended dissectors are designed to assist with controlled separation or mobilization of tissue, depending on the instrument's specific tip profile and intended application.

This model is identified by a 3mm size and a 90-degree angled configuration. These features may help the clinician approach selected anatomical areas from a particular direction. The exact tip shape, shaft length, and overall dimensions should be confirmed with the manufacturer before purchase.

Design and Functional Features

The defining characteristics of this instrument are its ball-style tip designation and 90-degree angled configuration. A ball-ended working tip may provide a rounded contact surface, while the angled design changes the approach orientation relative to the shaft.

The stated 3mm measurement should be verified to determine whether it refers to the tip diameter, working-end width, or another dimension. Exact geometry can vary by manufacturer and model, so buyers should consult the product specification sheet for accurate measurements.

Intended Neurosurgical Applications

Dissectors are used by trained surgeons to manipulate or separate tissues during selected surgical procedures. The suitability of a ball dissector depends on its tip design, dimensions, anatomical access requirements, and the intended clinical technique.

This instrument should only be selected for applications supported by the manufacturer's intended-use information. Its name alone does not establish compatibility with a particular neurosurgical procedure or anatomical structure.

3mm Working-End Size

The product title specifies a 3mm size. A working-end measurement can help clinicians and procurement teams compare instruments, but the precise meaning of the measurement must be confirmed.

Before ordering, verify the tip diameter or width, shaft length, working-end profile, and any relevant dimensional tolerances. These details help ensure that the instrument meets the requirements of the intended application.

90-Degree Angled Configuration

The 90-degree angled configuration describes the instrument's working orientation. An angled tip may provide access from a direction that differs from a straight instrument, depending on the operative approach and anatomical requirements.

The precise angle reference and shape of the working end are not specified in the product title. Consult the manufacturer's drawings or technical specifications to confirm the instrument's geometry.

Material and Construction

The material, steel grade, surface finish, and handle configuration are not specified. These details may vary between suppliers and product models.

Confirm the instrument's construction material and its compatibility with the manufacturer's approved cleaning and sterilization procedures. For clinical procurement, request documentation covering the instrument's intended use, dimensions, and processing requirements.

Handling and Inspection

Before use, inspect the working tip and shaft for deformation, corrosion, surface damage, or other defects. Confirm that the angled tip is intact and that the instrument matches the specified dimensions.

Neurosurgical instruments require careful handling by qualified professionals. Use the instrument only for its intended application and follow established clinical protocols to reduce the risk of unintended tissue injury.

Cleaning, Sterilization, and Maintenance

Follow the manufacturer's validated instructions for cleaning, inspection, packaging, sterilization, and maintenance. Confirm whether the instrument is reusable or intended for single use before processing it.

Inspect the working end carefully after cleaning and before each use. Instruments with damaged tips, altered geometry, or other defects should be removed from service according to facility procedures.

Choosing the Right Ball Dissector

When selecting a Ball Dissector 3mm 90° Angled, consider the working-end dimensions, angle, shaft length, handle design, material, and intended clinical application. Confirm that the instrument's geometry is appropriate for the required surgical approach.

Request a complete specification sheet from the supplier before purchase. Accurate product information supports appropriate instrument selection and helps ensure compatibility with clinical and reprocessing requirements.

Key Features

• Ball dissector-style surgical instrument

• Stated 3mm working-end size; measurement reference to be confirmed

• 90-degree angled configuration

• Designed for precision tissue dissection and manipulation

• Intended for appropriate neurosurgical applications

• Angled geometry may support selected approaches

• Shaft length and overall dimensions not specified

• Material and steel grade require confirmation

• Intended for use by qualified healthcare professionals

• Cleaning and sterilization must follow manufacturer instructions

Product Specifications

Frequently Asked Questions

1. What is a Ball Dissector used for?

A ball dissector is a surgical instrument used to assist with tissue separation or manipulation, depending on its design and intended clinical application.

2. What does 3mm mean in this product title?

The title specifies 3mm, but it does not clarify whether this refers to the tip diameter, working-end width, or another measurement. Confirm the exact dimension with the supplier.

3. What does the 90-degree angle indicate?

It identifies an angled working configuration. The exact angle reference and geometry should be confirmed in the manufacturer's technical drawings.

4. Is this instrument specifically designed for neurosurgery?

The product title identifies it as a neurosurgical instrument. Confirm its intended applications and suitability for a particular procedure with the manufacturer.

5. What material is the Ball Dissector made from?

The material and steel grade are not specified in the title. Request the manufacturer's material specifications before purchasing.

6. What is the overall length of this instrument?

The overall length and shaft length have not been provided. Consult the supplier's technical specifications for accurate dimensions.

7. Can the instrument be reused?

Reusability depends on the specific model and manufacturer labeling. Follow the instructions supplied with the instrument.

8. How should the Ball Dissector be sterilized?

Use only the cleaning and sterilization methods validated by the manufacturer for the exact instrument.

9. What should I verify before ordering?

Confirm the 3mm measurement reference, 90-degree tip geometry, shaft length, overall length, material, intended use, and reprocessing requirements.

10. Why is the tip condition important?

The working tip is essential to the instrument's intended function. Damage or deformation may affect handling and precision, so the instrument should be inspected before use and removed from service if defective.