Das Anterior Hip Bolster Assembly

The Das Anterior Hip Bolster Assembly is a specialized orthopedic surgical positioning accessory designed to support patient positioning during anterior hip procedures. Proper positioning is an important part of direct anterior hip surgery because it helps establish consistent access to the operative region and provides the surgical team with an organized working environment.

An anterior hip bolster assembly can be incorporated into an operating-room setup to help support the patient's positioning during procedures such as total hip arthroplasty. Its purpose is to assist with maintaining the intended body and hip position according to the requirements of the surgical technique and compatible operating-table system.

Stable positioning can help facilitate surgical exposure and provide appropriate access to the anterior aspect of the hip. The Das Anterior Hip Bolster Assembly is intended to work as part of a broader positioning and instrumentation system rather than as a tissue-retraction or implant-placement instrument.

The assembly may be used alongside anterior hip retractors, femoral elevators, acetabular retractors, femoral preparation instruments, femoral stem impactors, and other orthopedic surgical equipment. The specific positioning arrangement should be established by qualified surgical personnel according to the patient's anatomy, procedure, operating-room setup, and applicable equipment instructions.

Positioning accessories should be checked before use to ensure that components are secure, intact, and functioning as intended. The assembly should be correctly installed and adjusted according to the manufacturer's instructions before the surgical procedure begins.

The Das Anterior Hip Bolster Assembly is particularly relevant to orthopedic teams performing direct anterior hip procedures where appropriate patient positioning is an important part of the surgical workflow. It can help support a consistent setup while allowing the surgical team to focus on exposure, preparation, and implantation steps.

As a positioning accessory, the assembly should not be considered an implant or a surgical cutting instrument. Its role is to support the positioning environment in which the orthopedic procedure is performed.

Before each use, inspect the assembly for damaged components, loose connections, excessive wear, or other conditions that could affect safe operation. Any component that does not meet applicable inspection requirements should be removed from service and evaluated according to institutional procedures.

Cleaning and disinfection requirements depend on the specific materials and components included in the assembly. Reusable components should be processed according to the manufacturer's validated instructions and the healthcare facility's applicable infection-control protocols. Components that are not intended for sterilization should not be subjected to sterilization cycles unless specifically approved by the manufacturer.

The Das Anterior Hip Bolster Assembly provides a dedicated positioning solution for anterior hip surgery. It can form part of a comprehensive orthopedic operating-room setup for direct anterior total hip arthroplasty and related procedures requiring controlled patient positioning.

Key Features

• Designed for anterior hip surgical positioning
• Supports patient positioning during orthopedic hip procedures
• Suitable for direct anterior hip surgery
• Can support total hip arthroplasty setups
• Helps establish a consistent surgical positioning environment
• Designed to work with compatible operating-room equipment
• Complements anterior hip surgical instrumentation
• Suitable for professional orthopedic operating rooms
• Supports controlled access to the anterior hip region
• Requires inspection before clinical use
• Processing should follow manufacturer instructions
• Intended as a positioning accessory rather than an implant

Product Specifications

FAQs

What is the Das Anterior Hip Bolster Assembly?

It is a specialized orthopedic positioning accessory designed to support patient positioning during anterior hip surgical procedures.

What is an anterior hip bolster used for?

An anterior hip bolster is used to help establish and maintain appropriate patient positioning during procedures requiring access to the anterior hip.

Can the Das Anterior Hip Bolster Assembly be used for total hip arthroplasty?

It can support the positioning setup for direct anterior total hip arthroplasty when used with compatible operating-room equipment and according to the applicable instructions.

Is the bolster assembly a surgical retractor?

No. Its primary purpose is patient positioning and support rather than direct tissue retraction.

Can it be used with anterior hip surgical instruments?

Yes. It can form part of a broader anterior hip operating-room setup alongside retractors, femoral elevators, femoral preparation instruments, and other compatible equipment.

Is the Das Anterior Hip Bolster Assembly reusable?

Reusability depends on the specific components and manufacturer instructions. Reusable components should be processed according to validated procedures.

How should the bolster assembly be cleaned?

Cleaning and disinfection should follow the manufacturer's instructions for the specific materials and components. Components not approved for sterilization should not be sterilized.

What should be checked before using the assembly?

Inspect the components for damage, loose connections, excessive wear, and proper attachment to compatible equipment before use.