6 1/4″ Harms-Colibri Forceps 1x2 Teeth 0.12mm 45° Angled
Direct Manufacturer Pricing • Tax Exclusive
- 6 1/4″ Harms-Colibri Forceps 1x2 Teeth 0.12mm 45° Angled designed with a 45° angled configuration for fine tissue handling and suture manipulation.
- 0.12 mm tip size provides a defined grasping profile for ophthalmic procedures.
- Angled design supports a specialized working orientation within the operative field.
- Suitable for ophthalmic and microsurgery applications requiring a precise forceps.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 6 1/4″ Harms-Colibri Forceps 1x2 Teeth 0.12mm 45° Angled is a specialized ophthalmic instrument designed for fine tissue handling and suture manipulation during microsurgical procedures. Its ultra-fine 0.12 mm tips provide a distinct working orientation that can assist with positioning the working end within the operative field.
With an overall length of 6 1/4 inches and a 1x2 teeth configuration, this forceps provides a defined grasping profile for ophthalmic applications. The 45° angled design allows the working end to approach anatomical targets from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 6 1/4-inch overall length for controlled manual handling.
- 0.12 mm tip size provides a defined grasping profile.
- 45° angled configuration for specialized working orientation.
- Designed for fine tissue handling and suture manipulation.
- Suitable for ophthalmic and microsurgical applications.
- Supports positioning of the working end within the operative field.
- Specialized Harms-Colibri pattern for professional ophthalmic instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Harms-Colibri Forceps |
| Overall Length | 6 1/4″ |
| Working End / Blade / Jaw | 0.12 mm or 1x2 Teeth |
| Configuration | Angled |
| Primary Function | Tissue Handling and Suture Manipulation |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Ophthalmic / Microsurgery |
The 6 1/4″ Harms-Colibri Forceps 1x2 Teeth 0.12mm 45° Angled combines a 6 1/4-inch overall length with a 0.12 mm tip size and 45° angled configuration.
Its defined working profile is intended for fine tissue handling and suture manipulation in ophthalmic applications.
Design & Function
The Harms-Colibri Forceps features a 45° angled working configuration designed to provide a specialized orientation during microsurgical procedures. The ultra-fine tip design can assist in positioning the working end according to the requirements of the operative field.
The 0.12 mm tip size provides a defined grasping profile, while the 6 1/4-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for ophthalmic procedures requiring a precise instrument.
Surgical Applications
The 6 1/4″ Harms-Colibri Forceps 1x2 Teeth 0.12mm 45° Angled may be used for ophthalmic and microsurgery applications involving fine tissue handling and suture manipulation. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the Harms-Colibri Forceps before use, paying particular attention to the working end, jaw alignment, and cutting edges. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the Harms-Colibri Forceps appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Forceps?
The overall length is 6 1/4 inches.
2. What is the working end / blade or tip design of the instrument?
It features 0.12 mm tip size.
3. Is this Forceps curved or straight?
It features a 45° angled configuration.
4. What is a Harms-Colibri Forceps used for?
It is designed for controlled fine tissue handling and suture manipulation in ophthalmic applications.
5. What clinical advantage does the angled design provide?
The angled design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for ophthalmic surgery?
It may be used in ophthalmic and microsurgery applications where a precise angled forceps is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Harms-Colibri Forceps be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.