Herbert Screws 2.5mm Titanium 14–30mm Set

The Herbert Screws 2.5mm Titanium 14–30mm with Screwdriver are orthopedic fixation components intended for selected surgical procedures requiring small-diameter bone screws. Herbert-type screws are commonly associated with compression fixation designs used to stabilize appropriate fractures and bone fragments. The exact design, compression mechanism, and approved applications of this particular model should be verified with the manufacturer before clinical use.

Titanium Screw Construction

These Herbert screws are specified as titanium, a material widely used in orthopedic implants because of its favorable strength-to-weight characteristics, corrosion resistance, and established use in medical applications. The exact titanium grade and implant specifications should be confirmed through the manufacturer's documentation.

Titanium implants are used in various orthopedic fixation systems, but material alone does not establish suitability for a particular procedure. Surgeons should verify the implant's intended use, mechanical properties, compatibility, and applicable regulatory documentation before selecting it for a patient.

Screw Diameter and Length Options

The product title specifies a nominal screw diameter of 2.5mm and lengths ranging from 14mm to 30mm. These dimensions provide useful purchasing information when selecting screws for procedures requiring small-diameter fixation components. The exact available length increments and the quantity supplied in each size should be confirmed with the supplier.

Selecting the correct screw length is essential for appropriate fixation and anatomical compatibility. The surgeon must consider the bone dimensions, fracture configuration, required purchase, and surrounding anatomical structures. Screw length and diameter should always be selected according to the manufacturer's surgical technique and the clinical requirements of the procedure.

Herbert Screw Design and Orthopedic Applications

Herbert-type screws are used in selected orthopedic procedures where compression and stable fixation are required. Depending on the specific design and approved indications, applications may include certain fractures involving the wrist, hand, foot, and other small bones.

Not all screws marketed as Herbert screws share the same thread geometry or compression characteristics. Some designs are headless and incorporate differential thread pitches to generate compression during insertion. The design of this specific 2.5mm titanium model should be confirmed before assuming that it provides a particular compression mechanism.

Included Screwdriver

The set includes a screwdriver intended for insertion of compatible screws. A correctly matched driver helps maintain engagement with the screw's drive interface during insertion and can reduce the risk of slippage or interface damage when used appropriately.

Before surgery, healthcare professionals should verify the driver's tip configuration and compatibility with the supplied screw model. Additional instruments, such as guide wires, measuring devices, drills, or other insertion tools, may be required depending on the implant system and surgical technique. These accessories should not be assumed to be included unless specified by the supplier.

Clinical Handling and Implant Selection

The 2.5mm screw diameter makes this system relevant to selected small-bone fixation requirements, subject to the manufacturer's approved indications. Appropriate implant selection depends on patient anatomy, bone quality, fracture pattern, and the stability required for healing.

The operating surgeon should follow the manufacturer's instructions for use, including guidance on preparation, insertion, tightening, and postoperative management. Implants should be inspected for packaging integrity and identification details before use. Damaged, contaminated, or improperly stored implants must not be used.

Sterility, Storage, and Quality Documentation

The product title does not establish whether the screws are supplied sterile or non-sterile. Verify the packaging, sterility status, expiration information where applicable, and single-use labeling before purchasing or using the implants.

The manufacturer should also provide details about the titanium grade, implant dimensions, intended indications, and applicable quality or regulatory documentation. Implants must be handled according to their labeling and should not be reused or reprocessed unless explicitly permitted by the manufacturer and applicable regulations.

A Practical Option for Orthopedic Implant Procurement

The Herbert Screws 2.5mm Titanium 14–30mm with Screwdriver are an option for orthopedic departments and surgical facilities sourcing small-diameter fixation implants. Confirming the available screw lengths, thread design, material grade, driver compatibility, sterility status, and approved applications helps ensure that the system matches the requirements of the intended procedure.

Key Features

• Herbert-type orthopedic fixation screws

• 2.5mm nominal screw diameter

• Length range from 14mm to 30mm

• Titanium implant construction, grade to be confirmed

• Designed for compatible small-bone fixation applications

• Includes a matching screwdriver, subject to model verification

• Screw thread and compression design depend on the specific model

• Suitable applications depend on manufacturer-approved indications

• Requires verification of implant dimensions and compatibility

• Sterility status must be confirmed before use

• Intended for use by qualified orthopedic professionals

Product Specifications

Frequently Asked Questions

1. What are 2.5mm titanium Herbert screws used for?

Herbert-type screws are used in selected orthopedic procedures to stabilize appropriate fractures or bone fragments. Their precise indications depend on the implant design and the manufacturer's instructions.

2. What lengths are available for these Herbert screws?

The product title specifies a length range of 14mm to 30mm. Confirm the individual available lengths and quantities with the supplier before ordering.

3. Are these Herbert screws made from titanium?

Yes, the product title identifies titanium as the implant material. The exact titanium grade and supporting material documentation should be confirmed with the manufacturer.

4. Does the set include a screwdriver?

Yes, the product title states that a screwdriver is included. Verify that the screwdriver is compatible with the supplied screw design.

5. Do Herbert screws provide compression?

Many Herbert-type screw designs are intended to provide compression through their thread configuration. The compression characteristics of this specific 2.5mm model should be confirmed through its technical documentation.

6. Are these screws suitable for small bone surgery?

They may be suitable for selected small-bone fixation procedures when the implant's design and approved indications support the intended application. Final selection must be made by the qualified surgeon.

7. Are the titanium Herbert screws supplied sterile?

The sterility status is not specified in the product title. Check the manufacturer's packaging and labeling before use, and follow all applicable sterile handling instructions.

8. What should be checked before purchasing titanium Herbert screws?

Verify the screw diameter, available lengths, thread design, titanium grade, screwdriver compatibility, sterility status, regulatory documentation, and manufacturer-approved indications before ordering.