200mm Kerrison Punch 1mm 45°
Direct Manufacturer Pricing • Tax Exclusive
- 200mm Kerrison Punch 1mm 45° designed with a 45° angled configuration for controlled bone and tissue excision.
- 1 mm cutting tip provides a defined excision profile for microsurgical procedures.
- Angled design supports a specialized working orientation within the operative field.
- Suitable for microsurgical and minimally invasive applications requiring a Kerrison Punch.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 200mm Kerrison Punch 1mm 45° is a specialized microsurgical instrument designed for ultra-precise bone and tissue excision. Its 1mm cutting tip enables highly controlled removal in delicate anatomical spaces, while the 200mm shaft provides extended reach. The 45° angle allows optimal visualization and maneuverability in confined operative fields.
With an overall length of 200 mm and a 1 mm cutting tip, this Kerrison Punch provides a defined excision profile for microsurgical applications. The angled design allows the working end to approach anatomical targets from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 200 mm overall length for extended reach in deep-field access.
- 1 mm cutting tip provides ultra-precise excision of bone and tissue.
- 45° angled configuration for optimal visualization and maneuverability.
- Designed for controlled bone and tissue excision.
- Suitable for microsurgical and minimally invasive procedures.
- Supports positioning of the working end within the operative field.
- Specialized Kerrison pattern for professional surgical instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Kerrison Punch |
| Overall Length | 200 mm |
| Working End / Blade / Jaw | 1 mm cutting tip |
| Configuration | 45° angled |
| Primary Function | Bone and Tissue Excision |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Microsurgical / Minimally Invasive |
The 200mm Kerrison Punch 1mm 45° combines a 200 mm overall length with a 1 mm cutting tip and 45° angled configuration.
Its defined working profile is intended for controlled bone and tissue excision in microsurgical applications.
Design & Function
The Kerrison Punch features a 45° angled working configuration designed to provide a specialized orientation during microsurgical procedures. The cutting tip can assist in positioning the working end according to the requirements of the operative field.
The 1 mm cutting tip provides a defined excision profile, while the 200 mm overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for microsurgical procedures requiring a Kerrison Punch.
Surgical Applications
The 200mm Kerrison Punch 1mm 45° may be used for microsurgical and minimally invasive applications involving precise bone and tissue excision. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the Kerrison Punch before use, paying particular attention to the cutting tip and shaft alignment. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the Kerrison Punch appropriately to protect its cutting tip and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Kerrison Punch?
The overall length is 200 mm.
2. What is the working end / blade or tip design of the instrument?
It features 1 mm cutting tip.
3. Is this Kerrison Punch curved or straight?
It features a 45° angled configuration.
4. What is a Kerrison Punch used for?
It is designed for controlled bone and tissue excision in microsurgical applications.
5. What clinical advantage does the angled design provide?
The angled design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for microsurgery?
It may be used in microsurgical and minimally invasive applications where a 45° angled Kerrison Punch is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Kerrison Punch be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.