200mm Kerrison Punch 2mm 45°
Direct Manufacturer Pricing • Tax Exclusive
- 200mm Kerrison Punch 2mm 45° designed with a 45° configuration for fine bone and tissue excision.
- 2mm cutting tip provides a defined cutting profile for neurosurgical procedures.
- 45° design supports a specialized working orientation within the operative field.
- Suitable for neurosurgery and spinal applications requiring a Kerrison Punch.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 200mm Kerrison Punch 2mm 45° is a specialized neurosurgical instrument designed for fine bone and tissue excision in minimally invasive spinal procedures. Its 2mm cutting tip provides a distinct working orientation that can assist with positioning the cutting end within the operative field.
With an overall length of 200mm and a 2mm cutting tip, this punch provides a defined cutting profile for neurosurgical applications. The 45° angle allows the working end to approach confined anatomical areas from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 200mm overall length for extended reach to deep anatomical sites.
- 2mm cutting tip provides a defined cutting profile.
- 45° configuration for specialized working orientation.
- Designed for fine bone and tissue excision.
- Suitable for neurosurgical applications.
- Supports positioning of the working end within the operative field.
- Specialized Kerrison pattern for professional neurosurgical instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Kerrison Punch |
| Overall Length | 200mm |
| Working End / Blade / Jaw | 2mm cutting tip |
| Configuration | 45° |
| Primary Function | Bone and Tissue Excision |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Neurosurgery |
The 200mm Kerrison Punch 2mm 45° combines a 200mm overall length with a 2mm cutting tip and 45° configuration.
Its defined working profile is intended for fine bone and tissue excision in neurosurgical applications.
Design & Function
The Kerrison Punch features a 45° working configuration designed to provide a specialized orientation during spinal procedures. The cutting tip can assist in positioning the working end according to the requirements of the operative field.
The 2mm cutting tip provides a defined cutting profile, while the 200mm overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for neurosurgical procedures requiring a Kerrison Punch.
Surgical Applications
The 200mm Kerrison Punch 2mm 45° may be used for neurosurgical and spinal applications involving fine bone and tissue excision. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the Kerrison Punch before use, paying particular attention to the cutting tip and alignment. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the Kerrison Punch appropriately to protect its cutting tip and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Kerrison Punch?
The overall length is 200mm.
2. What is the working end / blade or tip design of the instrument?
It features 2mm cutting tip.
3. Is this Kerrison Punch curved or straight?
It features a 45° configuration.
4. What is a Kerrison Punch used for?
It is designed for controlled bone and tissue excision in neurosurgical applications.
5. What clinical advantage does the 45° design feature provide?
The 45° configuration provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for neurosurgery?
It may be used in neurosurgical and spinal applications where a 45° Kerrison Punch is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Kerrison Punch be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.