8 3/4″ Malis Type Bay Needle Holder 0.4mm Straight
Direct Manufacturer Pricing • Tax Exclusive
- 8 3/4″ Malis Type Bay Needle Holder designed with a straight configuration for precise needle handling and suturing.
- 0.4 mm tip size provides a defined grasping profile for microsurgical procedures.
- Straight design supports a specialized working orientation within the operative field.
- Suitable for ENT and microsurgery applications requiring a straight needle holder.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 8 3/4″ Malis Type Bay Needle Holder is a specialized ENT instrument designed for precise needle handling during microsurgical procedures. Its straight jaw design with ultra-fine 0.4 mm tips provides exceptional control, allowing for accurate placement and manipulation of sutures within the operative field.
With an overall length of 8 3/4 inches and a straight jaw configuration, this needle holder offers a defined grasping profile for delicate ENT applications. The bayonet offset design enhances visibility by keeping the surgeon’s hand out of the line of sight, supporting controlled manual manipulation during intricate procedures.
Key Features
- 8 3/4-inch overall length for enhanced control during delicate procedures.
- 0.4 mm tip size provides a defined grasping profile for microsurgical applications.
- Straight jaw configuration for specialized working orientation.
- Designed for precise needle handling and suturing.
- Suitable for ENT and microsurgical applications.
- Supports positioning of the working end within the operative field.
- Specialized Malis Type pattern for professional ENT instrument sets.
- Corrosion-resistant titanium construction for durability.
- Lightweight design reduces hand fatigue during prolonged use.
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Malis Type Bay Needle Holder |
| Overall Length | 8 3/4″ |
| Working End / Blade / Jaw | 0.4 mm tips |
| Configuration | Straight |
| Primary Function | Needle Handling and Suturing |
| Material | Titanium |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | ENT / Microsurgery |
The 8 3/4″ Malis Type Bay Needle Holder combines an 8 3/4-inch overall length with 0.4 mm tips and a straight configuration.
Its defined working profile is intended for precise needle handling in ENT applications.
Design & Function
The Malis Type Bay Needle Holder features a straight working configuration designed to provide a specialized orientation during microsurgical procedures. The straight jaw design can assist in positioning the working end according to the requirements of the operative field.
The 0.4 mm tip size provides a defined grasping profile, while the 8 3/4-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for ENT procedures requiring a straight needle holder.
Surgical Applications
The 8 3/4″ Malis Type Bay Needle Holder may be used for ENT and microsurgical applications involving precise needle handling and suturing. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the needle holder before use, paying particular attention to the working end and jaw alignment. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the needle holder appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Needle Holder?
The overall length is 8 3/4 inches.
2. What is the working end / blade or tip design of the instrument?
It features 0.4 mm tips.
3. Is this Needle Holder curved or straight?
It features a Straight configuration.
4. What is a Needle Holder used for?
It is designed for controlled needle handling and suturing in ENT applications.
5. What clinical advantage does the straight jaw design provide?
The straight jaw design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for ENT surgery?
It may be used in ENT and microsurgery applications where a straight needle holder is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Needle Holder be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.