8 3/4″ Malis Type Bay Needle Holder 0.6mm Curved
Direct Manufacturer Pricing • Tax Exclusive
- 8 3/4″ Malis Type Bay Needle Holder 0.6mm Curved designed with a curved configuration for controlled needle grasping.
- 0.6 mm tip size provides a defined grasping profile for microsurgical procedures.
- Curved design supports a specialized working orientation within the operative field.
- Suitable for ENT and microsurgery applications requiring a curved needle holder.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 8 3/4″ Malis Type Bay Needle Holder 0.6mm Curved is a specialized ENT instrument designed for advanced microsurgical, neurosurgical, and ENT procedures requiring enhanced maneuverability and visibility. Its bayonet offset allows unobstructed sightlines, while the curved jaw design provides ergonomic access to hard-to-reach areas.
With an overall length of 8 3/4 inches and 0.6 mm tips, this needle holder provides a defined grasping profile for microsurgical applications. The lightweight titanium construction ensures strength without compromising handling, supporting controlled manual manipulation during procedures.
Key Features
- 8 3/4-inch overall length for controlled manual handling.
- 0.6 mm tip size provides a defined grasping profile.
- Curved configuration for specialized working orientation.
- Designed for advanced microsurgical and ENT procedures.
- Suitable for neurosurgical applications requiring precision.
- Supports unobstructed sightlines during surgical procedures.
- Specialized Malis Type Bay pattern for professional ENT instrument sets.
- Lightweight titanium construction for enhanced maneuverability.
- Non-locking design allows immediate needle release.
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Malis Type Bay Needle Holder |
| Overall Length | 8 3/4″ |
| Working End / Blade / Jaw | 0.6 mm tips |
| Configuration | Curved |
| Primary Function | Needle Grasping |
| Material | Titanium |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | ENT / Microsurgery |
The 8 3/4″ Malis Type Bay Needle Holder 0.6mm Curved combines a 8 3/4-inch overall length with 0.6 mm tips and a curved configuration.
Its defined working profile is intended for needle grasping in ENT and microsurgical applications.
Design & Function
The Malis Type Bay Needle Holder features a curved working configuration designed to provide a specialized orientation during microsurgical procedures. The curved jaw design can assist in positioning the working end according to the requirements of the operative field.
The 0.6 mm tip size provides a defined grasping profile, while the 8 3/4-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for ENT procedures requiring a curved needle holder.
Surgical Applications
The 8 3/4″ Malis Type Bay Needle Holder 0.6mm Curved may be used for ENT and microsurgery applications involving precise needle handling. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the needle holder before use, paying particular attention to the working end, jaw alignment, and tip condition. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the needle holder appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Needle Holder?
The overall length is 8 3/4 inches.
2. What is the working end / blade or tip design of the instrument?
It features 0.6 mm tips.
3. Is this Needle Holder curved or straight?
It features a curved configuration.
4. What is a Needle Holder used for?
It is designed for controlled needle grasping in ENT applications.
5. What clinical advantage does the curved design provide?
The curved design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for ENT surgery?
It may be used in ENT and microsurgery applications where a curved needle holder is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Needle Holder be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.