7 1/4″ Maltz Rasp Down Straight TC
Direct Manufacturer Pricing • Tax Exclusive
- 7 1/4″ Maltz Rasp Down Straight TC designed with a straight configuration for controlled bone shaping and refinement.
- Tungsten carbide working surface provides a defined shaping profile for ENT procedures.
- Straight design supports a specialized working orientation within the operative field.
- Suitable for ENT and facial surgery applications requiring a straight instrument type.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 7 1/4″ Maltz Rasp Down Straight TC is a specialized ENT instrument designed for controlled bone shaping and refinement. Its straight, downstroke configuration provides a distinct working orientation that can assist with predictable, directional removal within the operative field.
With an overall length of 7 1/4 inches and a tungsten carbide working surface, this rasp provides a defined shaping profile for ENT applications. The ergonomic design allows the working end to approach anatomical targets from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 7 1/4-inch overall length for controlled manual handling.
- Tungsten carbide working surface provides a defined shaping profile.
- Straight configuration for specialized working orientation.
- Designed for controlled bone shaping and refinement.
- Suitable for ENT and facial surgery applications.
- Supports positioning of the working end within the operative field.
- Specialized Maltz pattern for professional ENT instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Maltz Rasp |
| Overall Length | 7 1/4″ |
| Working End / Blade / Jaw | Tungsten carbide surface |
| Configuration | Straight |
| Primary Function | Bone Shaping and Refinement |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | ENT / Facial Surgery |
The 7 1/4″ Maltz Rasp Down Straight TC combines a 7 1/4-inch overall length with a tungsten carbide working surface and straight configuration.
Its defined working profile is intended for controlled bone shaping and refinement in ENT applications.
Design & Function
The Maltz Rasp features a straight working configuration designed to provide a specialized orientation during bone preparation. The tungsten carbide surface can assist in positioning the working end according to the requirements of the operative field.
The tungsten carbide working surface provides a defined shaping profile, while the 7 1/4-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for ENT procedures requiring a straight instrument type.
Surgical Applications
The 7 1/4″ Maltz Rasp Down Straight TC may be used for ENT and facial surgery applications involving controlled bone shaping and refinement. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the Maltz Rasp before use, paying particular attention to the working end and surface condition. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the Maltz Rasp appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Maltz Rasp?
The overall length is 7 1/4 inches.
2. What is the working end / blade or tip design of the instrument?
It features a tungsten carbide working surface.
3. Is this Maltz Rasp curved or straight?
It features a straight configuration.
4. What is a Maltz Rasp used for?
It is designed for controlled bone shaping and refinement in ENT applications.
5. What clinical advantage does the straight design provide?
The straight design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for ENT surgery?
It may be used in ENT and facial surgery applications where a straight rasp is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Maltz Rasp be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.