7″ Miller Bone File Cross Cut TC
Direct Manufacturer Pricing • Tax Exclusive
- 7″ Miller Bone File Cross Cut TC designed with a cross-cut configuration for controlled bone shaping and smoothing.
- Cross-cut Tungsten Carbide surface provides a defined shaping profile for orthopedic procedures.
- Ergonomic design supports a specialized working orientation within the operative field.
- Suitable for orthopedic and bone surgery applications requiring a cross-cut bone file.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 7″ Miller Bone File Cross Cut TC is a specialized orthopedic instrument designed for smoothing and shaping bone during orthopedic procedures. Its cross-cut Tungsten Carbide surface provides a distinct working orientation that can assist with positioning the working end within the operative field.
With an overall length of 7 inches and a cross-cut design, this bone file provides a defined shaping profile for orthopedic applications. The ergonomic design allows the working end to approach bone surfaces from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 7-inch overall length for controlled manual handling.
- Cross-cut Tungsten Carbide surface provides a defined shaping profile.
- Ergonomic design for specialized working orientation.
- Designed for controlled bone shaping and smoothing.
- Suitable for orthopedic applications.
- Supports positioning of the working end within the operative field.
- Specialized Miller pattern for professional orthopedic instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Miller Bone File |
| Overall Length | 7″ |
| Working End / Blade / Jaw | Cross-cut Tungsten Carbide surface |
| Configuration | Cross Cut |
| Primary Function | Bone Shaping and Smoothing |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Orthopedic |
The 7″ Miller Bone File Cross Cut TC combines a 7-inch overall length with a cross-cut Tungsten Carbide surface.
Its defined working profile is intended for controlled bone shaping and smoothing in orthopedic applications.
Design & Function
The Miller Bone File features a cross-cut working configuration designed to provide a specialized orientation during bone preparation. The cross-cut design can assist in positioning the working end according to the requirements of the operative field.
The cross-cut Tungsten Carbide surface provides a defined shaping profile, while the 7-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for orthopedic procedures requiring a cross-cut bone file.
Surgical Applications
The 7″ Miller Bone File Cross Cut TC may be used for orthopedic and bone surgery applications involving smoothing and shaping of bone surfaces. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the Miller Bone File before use, paying particular attention to the working end and cutting edges. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the Miller Bone File appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Bone File?
The overall length is 7 inches.
2. What is the working end / blade or tip design of the instrument?
It features cross-cut Tungsten Carbide surface.
3. Is this Bone File curved or straight?
It features a cross-cut configuration.
4. What is a Bone File used for?
It is designed for controlled bone shaping and smoothing in orthopedic applications.
5. What clinical advantage does the cross-cut design provide?
The cross-cut design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for orthopedic surgery?
It may be used in orthopedic and bone surgery applications where a cross-cut bone file is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Bone File be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.