10 5/8″ Panther Nerve Hook 4mm Angled Left
Direct Manufacturer Pricing • Tax Exclusive
- 10 5/8″ Panther Nerve Hook designed with an angled left configuration for safe neural identification and mobilization.
- 4 mm working width provides a defined retraction profile for neurosurgical procedures.
- Angled design supports a specialized working orientation within narrow operative corridors.
- Suitable for neurosurgery and spinal surgery applications requiring an angled Nerve Hook.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 10 5/8″ Panther Nerve Hook is a specialized neurosurgical instrument designed for safe neural identification, mobilization, and retraction in minimally invasive spinal surgery. Its 90° angled shaft with a 4mm left-angled tip provides a distinct working orientation that can assist with positioning the tip within narrow operative corridors.
With an overall length of 10 5/8 inches and a 4mm working width, this Nerve Hook provides a defined retraction profile for neurosurgical applications. The angled design allows the working end to approach delicate neural structures from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 10 5/8-inch overall length for extended reach into deep operative fields.
- 4 mm working width provides a defined retraction profile.
- Angled left configuration for specialized working orientation.
- Designed for safe neural identification and mobilization.
- Suitable for minimally invasive spinal surgery applications.
- Supports positioning of the working end within narrow operative corridors.
- Specialized Panther pattern for professional neurosurgical instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Panther Nerve Hook |
| Overall Length | 10 5/8″ |
| Working End / Blade / Jaw | 4 mm |
| Configuration | Angled Left |
| Primary Function | Neural Identification and Retraction |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Neurosurgery / Spinal Surgery |
The 10 5/8″ Panther Nerve Hook combines a 10 5/8-inch overall length with a 4mm working width and angled left configuration.
Its defined working profile is intended for safe neural identification and mobilization in neurosurgery applications.
Design & Function
The Panther Nerve Hook features an angled left working configuration designed to provide a specialized orientation during spinal procedures. The 4mm tip design can assist in positioning the working end according to the requirements of the operative field.
The working dimension provides a defined retraction profile, while the 10 5/8-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for neurosurgical procedures requiring an angled instrument type.
Surgical Applications
The 10 5/8″ Panther Nerve Hook may be used for neurosurgery and spinal surgery applications involving neural identification and mobilization. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the Nerve Hook before use, paying particular attention to the working end, jaw alignment, and cutting edges. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the Nerve Hook appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Nerve Hook?
The overall length is 10 5/8 inches.
2. What is the working end / blade or tip design of the instrument?
It features 4 mm working width.
3. Is this Nerve Hook curved or straight?
It features an angled left configuration.
4. What is a Nerve Hook used for?
It is designed for controlled neural identification and mobilization in neurosurgery applications.
5. What clinical advantage does the angled design provide?
The angled design provides a specialized working orientation for positioning the working end within narrow operative corridors.
6. Is this instrument suitable for neurosurgery?
It may be used in neurosurgery and spinal surgery applications where an angled Nerve Hook is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Nerve Hook be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.