10 5/8″ Panther MIS Nerve Hook 4mm Angled Up
Direct Manufacturer Pricing • Tax Exclusive
- 10 5/8″ Panther MIS Nerve Hook 4mm Angled Up designed with an angled configuration for careful nerve identification and mobilization.
- 4 mm angled up hook tip provides a defined retraction profile for spinal procedures.
- Angled design supports a specialized working orientation within the operative field.
- Suitable for neurological and spinal surgery applications requiring an angled instrument type.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 10 5/8″ Panther MIS Nerve Hook 4mm Angled Up is a specialized neurological instrument designed for careful nerve identification, mobilization, and retraction in minimally invasive spinal procedures. Its 90° angled shaft provides a distinct working orientation that can assist with positioning the hook tip within the operative field.
With an overall length of 10 5/8 inches and a 4 mm angled up hook tip, this nerve hook provides a defined retraction profile for spinal applications. The angled design allows the working end to approach neural structures from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 10 5/8-inch overall length for extended reach into deep surgical corridors.
- 4 mm angled up hook tip provides a defined retraction profile.
- Angled configuration for specialized working orientation.
- Designed for careful nerve identification and mobilization.
- Suitable for minimally invasive spinal surgery applications.
- Supports positioning of the working end within the operative field.
- Specialized Panther pattern for professional neurological instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Panther MIS Nerve Hook |
| Overall Length | 10 5/8″ |
| Working End / Blade / Jaw | 4 mm Angled Up Hook Tip |
| Configuration | Angled |
| Primary Function | Nerve Identification and Retraction |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Neurological / Spinal Surgery |
The 10 5/8″ Panther MIS Nerve Hook 4mm Angled Up combines a 10 5/8-inch overall length with a 4 mm angled up hook tip and angled configuration.
Its defined working profile is intended for careful nerve identification and mobilization in neurological applications.
Design & Function
The Panther MIS Nerve Hook features an angled working configuration designed to provide a specialized orientation during spinal procedures. The angled hook tip can assist in positioning the working end according to the requirements of the operative field.
The 4 mm angled up hook tip provides a defined retraction profile, while the 10 5/8-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for neurological procedures requiring an angled instrument type.
Surgical Applications
The 10 5/8″ Panther MIS Nerve Hook 4mm Angled Up may be used for neurological and spinal surgery applications involving careful nerve identification and mobilization. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the Panther MIS Nerve Hook before use, paying particular attention to the working end, hook alignment, and tip integrity. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the Panther MIS Nerve Hook appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this MIS Nerve Hook?
The overall length is 10 5/8 inches.
2. What is the working end / blade or tip design of the instrument?
It features 4 mm angled up hook tip.
3. Is this MIS Nerve Hook curved or straight?
It features an angled configuration.
4. What is a MIS Nerve Hook used for?
It is designed for controlled nerve identification and mobilization in neurological applications.
5. What clinical advantage does the angled design provide?
The angled design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for neurological surgery?
It may be used in neurological and spinal surgery applications where an angled nerve hook is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the MIS Nerve Hook be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.