7 cm MIS Tubular Retractor Titanium 18mm Beveled
Direct Manufacturer Pricing • Tax Exclusive
- 7 cm MIS Tubular Retractor Titanium 18mm Beveled designed with a beveled configuration for deep anatomical access.
- 18 mm working diameter provides a defined exposure profile for orthopedic procedures.
- Beveled design supports a specialized working orientation within the operative field.
- Suitable for orthopedic and spine surgery applications requiring a tubular retractor.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 7 cm MIS Tubular Retractor Titanium 18mm Beveled is a specialized surgical instrument designed for deep anatomical access during minimally invasive spine procedures. Its 18mm working diameter and extended 7 cm length enable stable exposure in cases requiring significant operative depth.
With a beveled distal profile, this retractor improves visualization and directional access within deep surgical corridors, allowing optimized line-of-sight to targeted structures. This configuration supports effective decompression and manipulation of anatomical structures during surgery.
Key Features
- 7 cm overall length for enhanced access in deep surgical sites.
- 18 mm working diameter provides a defined exposure profile.
- Beveled configuration for improved visualization and access.
- Designed for minimally invasive spine procedures.
- Suitable for orthopedic and spinal surgery applications.
- Supports stable positioning of the working end within the operative field.
- Specialized titanium construction for lightweight and strength.
- Corrosion-resistant surgical-grade titanium material.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | MIS Tubular Retractor |
| Overall Length | 7 cm |
| Working End / Blade / Jaw | 18 mm |
| Configuration | Beveled |
| Primary Function | Deep Anatomical Access |
| Material | German Titanium |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Minimally Invasive Spine Surgery |
The 7 cm MIS Tubular Retractor Titanium 18mm Beveled combines a 7 cm overall length with an 18 mm working diameter and beveled configuration.
Its defined working profile is intended for deep anatomical access in minimally invasive spine procedures.
Design & Function
The MIS Tubular Retractor features a beveled working configuration designed to provide specialized orientation during spine procedures. The beveled design can assist in positioning the working end according to the requirements of the operative field.
The 18 mm working diameter provides a defined exposure profile, while the 7 cm overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for orthopedic procedures requiring a tubular retractor.
Surgical Applications
The 7 cm MIS Tubular Retractor Titanium 18mm Beveled may be used for orthopedic and spine surgery applications involving deep anatomical access. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the MIS Tubular Retractor before use, paying particular attention to the working end and beveled profile. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the MIS Tubular Retractor appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this MIS Tubular Retractor?
The overall length is 7 cm.
2. What is the working end / blade or tip design of the instrument?
It features 18 mm working diameter.
3. Is this MIS Tubular Retractor beveled or straight?
It features a beveled configuration.
4. What is a MIS Tubular Retractor used for?
It is designed for controlled deep anatomical access in minimally invasive spine surgery.
5. What clinical advantage does the beveled design provide?
The beveled design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for orthopedic surgery?
It may be used in orthopedic and spine surgery applications where a beveled tubular retractor is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the MIS Tubular Retractor be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.