8 cm MIS Tubular Retractor Titanium 18mm Beveled
Direct Manufacturer Pricing • Tax Exclusive
- 8 cm MIS Tubular Retractor Titanium 18mm Beveled designed with a beveled configuration for stable access and visualization.
- 18 mm working diameter provides a defined access profile for spinal procedures.
- Beveled design supports a specialized working orientation within the operative field.
- Suitable for spinal and orthopedic applications requiring a tubular retractor.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 8 cm MIS Tubular Retractor Titanium 18mm Beveled is a specialized spinal instrument designed for stable, extended access in deeper minimally invasive procedures. Its 18mm working diameter supports efficient instrument maneuverability, while the 8 cm length accommodates deeper anatomical targets.
The beveled distal edge enhances visualization and directional exposure, allowing surgeons to focus on targeted structures without repositioning the entire assembly. This design supports optimized surgical outcomes in complex spinal interventions.
Key Features
- 8 cm overall length for extended access in deep anatomical areas.
- 18 mm working diameter provides efficient instrument maneuverability.
- Beveled configuration for enhanced visualization and directional exposure.
- Designed for stable access during minimally invasive spinal procedures.
- Suitable for spinal and orthopedic applications.
- Supports positioning of the working end within the operative field.
- Specialized titanium construction for lightweight durability.
- Corrosion-resistant surgical-grade titanium material.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | MIS Tubular Retractor |
| Overall Length | 8 cm |
| Working End / Blade / Jaw | 18 mm |
| Configuration | Beveled |
| Primary Function | Stable Access and Visualization |
| Material | German Titanium |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Spinal / Orthopedic Surgery |
The 8 cm MIS Tubular Retractor Titanium 18mm Beveled combines an 8 cm overall length with an 18 mm working diameter and beveled design.
Its defined working profile is intended for stable access and visualization in spinal applications.
Design & Function
The MIS Tubular Retractor features a beveled working configuration designed to provide a specialized orientation during spinal procedures. The beveled edge can assist in positioning the working end according to the requirements of the operative field.
The 18 mm working diameter provides a defined access profile, while the 8 cm overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for spinal procedures requiring a tubular retractor.
Surgical Applications
The 8 cm MIS Tubular Retractor Titanium 18mm Beveled may be used for spinal and orthopedic applications involving stable access and visualization. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the MIS Tubular Retractor before use, paying particular attention to the working end and beveled edge. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the MIS Tubular Retractor appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this MIS Tubular Retractor?
The overall length is 8 cm.
2. What is the working end / blade or tip design of the instrument?
It features 18 mm working diameter.
3. Is this MIS Tubular Retractor curved or straight?
It features a beveled configuration.
4. What is a MIS Tubular Retractor used for?
It is designed for controlled stable access and visualization in spinal applications.
5. What clinical advantage does the beveled design provide?
The beveled edge provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for spinal surgery?
It may be used in spinal and orthopedic applications where a beveled tubular retractor is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the MIS Tubular Retractor be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.