7 cm MIS Tubular Retractor Titanium 20mm Beveled
Direct Manufacturer Pricing • Tax Exclusive
- 7 cm MIS Tubular Retractor Titanium 20mm Beveled designed with a beveled configuration for precise decompression and disc work.
- 20 mm internal diameter provides a defined working profile for minimally invasive spinal procedures.
- Beveled design supports a specialized working orientation within the operative field.
- Suitable for minimally invasive spinal surgery applications requiring a tubular retractor.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 7 cm MIS Tubular Retractor Titanium 20mm Beveled is a specialized surgical instrument designed for minimally invasive spinal procedures. Its 20mm internal diameter accommodates standard MIS instruments, while the 7 cm length offers deeper anatomical access. The beveled distal edge allows targeted visualization of surgical structures, supporting precise decompression or disc work without excessive tissue manipulation.
With an overall length of 7 cm and a 20 mm internal diameter, this retractor provides a defined working profile for spinal applications. The rigid tubular body maintains consistent retraction, allowing for optimal exposure of the surgical field during procedures.
Key Features
- 7 cm overall length for deeper anatomical access.
- 20 mm internal diameter accommodates standard MIS instruments.
- Beveled configuration for targeted visualization of surgical structures.
- Designed for precise decompression and disc work.
- Suitable for minimally invasive spinal surgery applications.
- Supports optimal exposure of the surgical field.
- Specialized MIS design for professional surgical instrument sets.
- Corrosion-resistant surgical-grade titanium construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | MIS Tubular Retractor |
| Overall Length | 7 cm |
| Working End / Blade / Jaw | 20 mm internal diameter |
| Configuration | Beveled |
| Primary Function | Minimally Invasive Spinal Surgery |
| Material | German Titanium |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Minimally Invasive Surgery |
The 7 cm MIS Tubular Retractor Titanium 20mm Beveled combines a 7 cm overall length with a 20 mm internal diameter and beveled configuration.
Its defined working profile is intended for precise decompression and disc work in minimally invasive spinal surgery applications.
Design & Function
The MIS Tubular Retractor features a beveled working configuration designed to provide a specialized orientation during spinal procedures. The rigid tubular body can assist in maintaining consistent retraction according to the requirements of the operative field.
The 20 mm internal diameter provides a defined working profile, while the 7 cm overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for minimally invasive spinal procedures requiring a tubular retractor.
Surgical Applications
The 7 cm MIS Tubular Retractor Titanium 20mm Beveled may be used for minimally invasive spinal surgery applications involving decompression and disc work. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the MIS Tubular Retractor before use, paying particular attention to the working end and alignment. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the MIS Tubular Retractor appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this MIS Tubular Retractor?
The overall length is 7 cm.
2. What is the working end / blade or tip design of the instrument?
It features 20 mm internal diameter.
3. Is this MIS Tubular Retractor curved or straight?
It features a beveled configuration.
4. What is a MIS Tubular Retractor used for?
It is designed for controlled minimally invasive spinal surgery.
5. What clinical advantage does the beveled design provide?
The beveled design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for minimally invasive spinal surgery?
It may be used in minimally invasive surgery applications where a beveled tubular retractor is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the MIS Tubular Retractor be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.