OB/GYN 5½″ Iowa Needle Guide Trumpet Straight

The OB/GYN 5½″ Iowa Needle Guide is designed for controlled needle guidance and positioning during compatible gynecological procedures. It features a 5½-inch overall length and a straight trumpet configuration.

The instrument provides a defined pathway for guiding a needle while allowing the clinician to maintain manual control. Its compact length supports controlled handling and positioning within the intended operative field.

Design and Configuration

The needle guide features a 5½-inch overall length with a straight trumpet configuration. The straight design provides a direct working profile, while the trumpet-style configuration supports controlled manual handling and needle positioning.

Before use, the instrument should be inspected for proper alignment, surface condition, cleanliness, and structural integrity.

Working-End Characteristics

The working end is configured to support controlled guidance of a compatible needle. The straight profile provides a direct orientation for positioning, while the trumpet configuration offers a defined gripping and handling profile.

The guide should remain smooth, properly formed, and free from visible deformation or damage. Any irregularity that could affect needle passage or positioning should be evaluated before use.

Gynecological Applications

The OB/GYN 5½″ Iowa Needle Guide may be used for compatible gynecological procedures requiring controlled needle guidance or positioning.

Specific clinical application, needle selection, and method of use should be determined by a qualified healthcare professional according to the procedure and established clinical protocols.

Handling and Use Considerations

The 5½-inch length provides a compact working profile while allowing controlled manual positioning. The straight configuration should be maintained during handling to preserve the intended alignment.

Before use, verify that the instrument is clean, structurally intact, properly aligned, and free from visible damage. Avoid using an instrument with a deformed or obstructed working pathway.

Cleaning and Instrument Care

Clean the needle guide promptly after use according to the healthcare facility's validated instrument-cleaning procedure. Particular attention should be given to the needle-guiding pathway and areas around the trumpet-style handle where residual material may accumulate.

Avoid abrasive cleaning methods that could damage the working surface or internal pathway. After cleaning, inspect the guide for residue, corrosion, scratches, deformation, and obstruction.

Sterilization and Inspection

Sterilization should be performed according to the manufacturer's validated instructions and the healthcare facility's established sterilization protocol. Before each use, inspect the instrument for cleanliness, structural integrity, surface damage, and a clear working pathway.

Any instrument showing compromised functionality, deformation, or obstruction should be removed from service and evaluated according to institutional procedures.

Technical Specifications

• Instrument Type: Needle Guide
• Design: Iowa
• Overall Length: 5½″
• Configuration: Straight
• Handle / Profile: Trumpet
• Application: Gynecological / OB/GYN procedures
• Configuration: Single instrument
• Material: Not specified

Frequently Asked Questions

1. What is the OB/GYN 5½″ Iowa Needle Guide used for?
It is designed for controlled needle guidance and positioning during compatible gynecological procedures.

2. What is the configuration of this needle guide?
It has a straight trumpet configuration.

3. What is the overall length?
The instrument has an overall length of 5½ inches.

4. What does the Iowa designation indicate?
Iowa identifies the design/configuration of the needle guide.

5. Is this supplied as a set?
No. It is supplied as a single needle guide.

6. How should the needle guide be maintained?
It should be cleaned, sterilized, inspected, and handled according to validated instrument-care procedures and applicable healthcare-facility protocols.