7 1/2″ Partsch Mallet 22mm Head
Direct Manufacturer Pricing • Tax Exclusive
- 7 1/2″ Partsch Mallet 22mm Head designed with a balanced configuration for controlled tapping and instrument seating.
- 22 mm head provides a defined percussion profile for orthopedic procedures.
- Balanced design supports a specialized working orientation within the operative field.
- Suitable for orthopedic and dental applications requiring a mallet.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 7 1/2″ Partsch Mallet 22mm Head is a specialized orthopedic instrument designed for controlled tapping and instrument seating in orthopedic and dental procedures. Its balanced head design provides a distinct working orientation that can assist with positioning the working end within the operative field.
With an overall length of 7 1/2 inches and a 22 mm head, this mallet provides a defined percussion profile for orthopedic applications. The ergonomic design allows the working end to approach the target area from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 7 1/2-inch overall length for controlled manual handling.
- 22 mm head provides a defined percussion profile.
- Balanced head design for specialized working orientation.
- Designed for controlled tapping and instrument seating.
- Suitable for orthopedic and dental applications.
- Supports positioning of the working end within the operative field.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Partsch Mallet |
| Overall Length | 7 1/2″ |
| Working End / Blade / Jaw | 22 mm Head |
| Configuration | Balanced |
| Primary Function | Controlled Tapping and Instrument Seating |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Orthopedic / Dental |
The 7 1/2″ Partsch Mallet 22mm Head combines a 7 1/2-inch overall length with a 22 mm head and balanced design.
Its defined working profile is intended for controlled tapping and instrument seating in orthopedic and dental applications.
Design & Function
The Partsch Mallet features a balanced working configuration designed to provide a specialized orientation during tapping procedures. The head design can assist in positioning the working end according to the requirements of the operative field.
The 22 mm head provides a defined percussion profile, while the 7 1/2-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for orthopedic procedures requiring a mallet.
Surgical Applications
The 7 1/2″ Partsch Mallet 22mm Head may be used for orthopedic and dental applications involving controlled tapping and instrument seating. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the Partsch Mallet before use, paying particular attention to the head alignment and overall integrity. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the Partsch Mallet appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Partsch Mallet?
The overall length is 7 1/2 inches.
2. What is the working end / blade or tip design of the instrument?
It features 22 mm head.
3. Is this Partsch Mallet curved or straight?
It features a balanced configuration.
4. What is a Partsch Mallet used for?
It is designed for controlled tapping and instrument seating in orthopedic applications.
5. What clinical advantage does the balanced head design provide?
The balanced design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for orthopedic surgery?
It may be used in orthopedic and dental applications where a balanced mallet is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Partsch Mallet be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.