6 3/8″ Pick Angled 90° Medium 3mm Point
Direct Manufacturer Pricing • Tax Exclusive
- 6 3/8″ Pick Angled 90° Medium 3mm Point designed with an angled configuration for controlled lifting and probing.
- 3 mm point provides a defined probing profile for ENT procedures.
- Angled design supports a specialized working orientation within the operative field.
- Suitable for ENT and microsurgical applications requiring an angled Pick.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 6 3/8″ Pick Angled 90° Medium 3mm Point is a specialized ENT instrument designed for controlled lifting, probing, and manipulation of tissue or prosthetic components in the middle ear. Its 3mm tip provides a larger contact area than fine picks, allowing secure engagement while maintaining atraumatic handling.
With an overall length of 6 3/8 inches and a 3mm point, this Pick provides a defined probing profile for ENT applications. The 90° angled design allows the working end to approach anatomical targets from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 6 3/8-inch overall length for controlled manual handling.
- 3 mm point provides a defined probing profile.
- Angled 90° configuration for specialized working orientation.
- Designed for controlled lifting and manipulation of tissue.
- Suitable for ENT applications.
- Supports positioning of the working end within the operative field.
- Specialized Pick pattern for professional ENT instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Pick |
| Overall Length | 6 3/8″ |
| Working End / Blade / Jaw | 3 mm Point |
| Configuration | Angled 90° |
| Primary Function | Lifting and Probing |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | ENT |
The 6 3/8″ Pick Angled 90° Medium 3mm Point combines a 6 3/8-inch overall length with a 3 mm point and angled configuration.
Its defined working profile is intended for controlled lifting and manipulation in ENT applications.
Design & Function
The Pick features an angled 90° working configuration designed to provide a specialized orientation during tissue manipulation. The 3mm point design can assist in positioning the working end according to the requirements of the operative field.
The 3 mm point provides a defined probing profile, while the 6 3/8-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for ENT procedures requiring an angled instrument.
Surgical Applications
The 6 3/8″ Pick Angled 90° Medium 3mm Point may be used for ENT and microsurgical applications involving controlled lifting and probing of tissue or prosthetic components. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the Pick before use, paying particular attention to the working end and alignment. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the Pick appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Pick?
The overall length is 6 3/8 inches.
2. What is the working end / blade or tip design of the instrument?
It features 3 mm point.
3. Is this Pick angled or straight?
It features an angled 90° configuration.
4. What is a Pick used for?
It is designed for controlled lifting and probing in ENT applications.
5. What clinical advantage does the angled design provide?
The angled design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for ENT surgery?
It may be used in ENT and microsurgical applications where an angled 90° Pick is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Pick be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.