6 1/2″ Wire Strut Guide Angled
Direct Manufacturer Pricing • Tax Exclusive
- 6 1/2″ Wire Strut Guide designed with an angled configuration for guiding prosthetic struts and fine wires.
- Angled working end provides a defined guiding profile for ENT procedures.
- Angled design supports a specialized working orientation within the operative field.
- Suitable for ENT and ear microsurgery applications requiring an angled instrument type.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 6 1/2″ Wire Strut Guide is a specialized ENT instrument designed for guiding prosthetic struts or fine wires during ear microsurgery. Its angled design provides enhanced access and visibility in confined surgical spaces, allowing for controlled placement and manipulation with minimal trauma to the ossicles or tympanic membrane.
With an overall length of 6 1/2 inches and a precise angled working end, this Wire Strut Guide provides a defined guiding profile for ENT applications. The ergonomic design allows the working end to approach anatomical targets from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 6 1/2-inch overall length for controlled manual handling.
- Angled working end provides a defined guiding profile.
- Angled configuration for specialized working orientation.
- Designed for guiding prosthetic struts and fine wires.
- Suitable for ENT and ear microsurgery applications.
- Supports positioning of the working end within the operative field.
- Specialized Wire Strut Guide pattern for professional ENT instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Wire Strut Guide |
| Overall Length | 6 1/2″ |
| Working End / Blade / Jaw | Angled working end |
| Configuration | Angled |
| Primary Function | Guiding Prosthetic Struts and Fine Wires |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | ENT / Ear Microsurgery |
The 6 1/2″ Wire Strut Guide combines a 6 1/2-inch overall length with an angled working end.
Its defined guiding profile is intended for guiding prosthetic struts and fine wires in ENT applications.
Design & Function
The Wire Strut Guide features an angled working configuration designed to provide a specialized orientation during ear microsurgery. The angled design can assist in positioning the working end according to the requirements of the operative field.
The angled working end provides a defined guiding profile, while the 6 1/2-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for ENT procedures requiring an angled instrument type.
Surgical Applications
The 6 1/2″ Wire Strut Guide may be used for ENT and ear microsurgery applications involving guiding prosthetic struts or fine wires. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the Wire Strut Guide before use, paying particular attention to the working end and alignment. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the Wire Strut Guide appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Wire Strut Guide?
The overall length is 6 1/2 inches.
2. What is the working end / blade or tip design of the instrument?
It features an angled working end.
3. Is this Wire Strut Guide curved or straight?
It features an angled configuration.
4. What is a Wire Strut Guide used for?
It is designed for controlled guiding prosthetic struts and fine wires in ENT applications.
5. What clinical advantage does the angled design provide?
The angled design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for ENT surgery?
It may be used in ENT and ear microsurgery applications where an angled Wire Strut Guide is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Wire Strut Guide be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.