10″ Ferris-Smith IVD Rongeur 4 × 10mm Teeth Up
Direct Manufacturer Pricing • Tax Exclusive
- 10″ Ferris-Smith IVD Rongeur designed with a teeth up configuration for efficient removal of disc material.
- 4 × 10mm jaw dimension provides a defined grasping profile for neurosurgical procedures.
- Teeth up design supports a specialized working orientation within the operative field.
- Suitable for neurosurgical and spinal surgery applications requiring a rongeur.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 10″ Ferris-Smith IVD Rongeur is a specialized neurosurgical instrument designed for efficient removal of disc material during spinal decompression procedures. Its up-oriented teeth ensure secure engagement with disc tissue, reducing the risk of slippage while providing smooth, controlled excision.
With an overall length of 10 inches and a 4 × 10mm jaw dimension, this rongeur provides a defined grasping profile for neurosurgical applications. The ergonomic design allows the working end to approach the anatomical target from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 10-inch overall length for deep surgical reach.
- 4 × 10mm jaw dimension provides a defined grasping profile.
- Teeth up configuration for secure engagement with disc tissue.
- Designed for efficient removal of disc material.
- Suitable for neurosurgical applications.
- Supports positioning of the working end within the operative field.
- Specialized Ferris-Smith pattern for professional neurosurgical instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Ferris-Smith IVD Rongeur |
| Overall Length | 10″ |
| Working End / Blade / Jaw | 4 × 10mm |
| Configuration | Teeth Up |
| Primary Function | Disc Material Removal |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Neurosurgical |
The 10″ Ferris-Smith IVD Rongeur combines a 10-inch overall length with a 4 × 10mm jaw dimension and teeth up configuration.
Its defined working profile is intended for efficient removal of disc material in neurosurgical applications.
Design & Function
The Ferris-Smith IVD Rongeur features a teeth up working configuration designed to provide a specialized orientation during spinal decompression procedures. The jaw design can assist in positioning the working end according to the requirements of the operative field.
The 4 × 10mm jaw profile provides a defined grasping profile, while the 10-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for neurosurgical procedures requiring a rongeur.
Surgical Applications
The 10″ Ferris-Smith IVD Rongeur may be used for neurosurgical and spinal surgery applications involving the removal of intervertebral disc material. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the rongeur before use, paying particular attention to the working end, jaw alignment, and cutting edges. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the rongeur appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Rongeur?
The overall length is 10 inches.
2. What is the working end / blade or tip design of the instrument?
It features 4 × 10mm.
3. Is this Rongeur curved or straight?
It features a Teeth Up configuration.
4. What is a Rongeur used for?
It is designed for controlled disc material removal in neurosurgical applications.
5. What clinical advantage does the teeth up design provide?
The teeth up design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for neurosurgery?
It may be used in neurosurgical and spinal surgery applications where a teeth up rongeur is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Rongeur be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.