11 1/4″ Cobb Endura-Cut Spinal Elevator 3/4″
Direct Manufacturer Pricing • Tax Exclusive
- 11 1/4″ Cobb Endura-Cut Spinal Elevator 3/4″ designed with a straight configuration for controlled cutting and elevation.
- 3/4 inch blade width provides a defined elevating profile for neurosurgical procedures.
- Straight design supports a specialized working orientation within the operative field.
- Suitable for neurosurgical and spinal surgery applications requiring a spinal elevator.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 11 1/4″ Cobb Endura-Cut Spinal Elevator 3/4″ is a specialized neurosurgical instrument designed for superior cutting and elevating performance during spinal procedures. Its Endura-Cut blade edge enhances cutting efficiency through dense or fibrous tissues while maintaining controlled elevation. The extended 11 1/4″ length provides improved access and leverage in deep surgical fields.
With an overall length of 11 1/4 inches and a 3/4 inch blade width, this spinal elevator provides a defined elevating profile for neurosurgical applications. The ergonomic design allows the working end to approach the anatomical target from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 11 1/4-inch overall length for controlled manual handling.
- 3/4 inch blade width provides a defined elevating profile.
- Ergonomic design for specialized working orientation.
- Designed for controlled cutting and elevation.
- Suitable for neurosurgical applications.
- Supports positioning of the working end within the operative field.
- Specialized Cobb pattern for professional neurosurgical instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Cobb Endura-Cut Spinal Elevator |
| Overall Length | 11 1/4″ |
| Working End / Blade / Jaw | 3/4 inch blade |
| Configuration | Straight |
| Primary Function | Cutting and Elevation |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Neurosurgical |
The 11 1/4″ Cobb Endura-Cut Spinal Elevator 3/4″ combines a 11 1/4-inch overall length with a 3/4 inch blade width and straight configuration.
Its defined working profile is intended for controlled cutting and elevation in neurosurgical applications.
Design & Function
The Cobb Endura-Cut Spinal Elevator features a straight working configuration designed to provide a specialized orientation during spinal procedures. The blade design can assist in positioning the working end according to the requirements of the operative field.
The 3/4 inch blade provides a defined elevating profile, while the 11 1/4-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for neurosurgical procedures requiring a spinal elevator.
Surgical Applications
The 11 1/4″ Cobb Endura-Cut Spinal Elevator 3/4″ may be used for neurosurgical and spinal surgery applications involving cutting and elevating dense or fibrous tissues. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the spinal elevator before use, paying particular attention to the working end, blade alignment, and cutting edges. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the spinal elevator appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Spinal Elevator?
The overall length is 11 1/4 inches.
2. What is the working end / blade or tip design of the instrument?
It features 3/4 inch blade.
3. Is this Spinal Elevator curved or straight?
It features a Straight configuration.
4. What is a Spinal Elevator used for?
It is designed for controlled cutting and elevation in neurosurgical applications.
5. What clinical advantage does the straight design provide?
The straight design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for neurosurgery?
It may be used in neurosurgical and spinal surgery applications where a straight spinal elevator is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Spinal Elevator be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.