11 3/4″ VATS Needle Holder FineTouch Jaws 5mm Shaft
Direct Manufacturer Pricing • Tax Exclusive
- 11 3/4″ VATS Needle Holder FineTouch Jaws designed with a fine configuration for controlled needle handling and suturing.
- 5 mm jaw dimension provides a defined grasping profile for cardiovascular procedures.
- Fine design supports a specialized working orientation within the operative field.
- Suitable for cardiovascular and thoracic surgery applications requiring a fine needle holder.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 11 3/4″ VATS Needle Holder FineTouch Jaws is a specialized cardiovascular instrument designed for controlled needle handling and suturing during video-assisted thoracic surgery (VATS) and other procedures requiring extended access through a restricted operative field. Its 11 3/4-inch overall length and a 5 mm shaft provide a practical combination of reach and minimally invasive access, while the FineTouch jaws are designed to support precise needle control.
With an overall length of 11 3/4 inches and a 5 mm jaw dimension, this needle holder provides a defined grasping profile for cardiovascular applications. The fine configuration allows the working end to approach anatomical targets from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 11 3/4-inch overall length for controlled manual handling.
- 5 mm jaw dimension provides a defined grasping profile.
- Fine configuration for specialized working orientation.
- Designed for controlled needle handling and suturing.
- Suitable for cardiovascular and thoracic surgery applications.
- Supports positioning of the working end within the operative field.
- Specialized VATS pattern for professional cardiovascular instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | VATS Needle Holder |
| Overall Length | 11 3/4″ |
| Working End / Blade / Jaw | 5 mm |
| Configuration | FineTouch |
| Primary Function | Needle Handling and Suturing |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Cardiovascular / Thoracic Surgery |
The 11 3/4″ VATS Needle Holder FineTouch Jaws combines a 11 3/4-inch overall length with a 5 mm jaw dimension and FineTouch configuration.
Its defined working profile is intended for controlled needle handling and suturing in cardiovascular applications.
Design & Function
The VATS Needle Holder features a fine working configuration designed to provide a specialized orientation during needle handling. The jaw design can assist in positioning the working end according to the requirements of the operative field.
The 5 mm jaw dimension provides a defined grasping profile, while the 11 3/4-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for cardiovascular procedures requiring a fine instrument type.
Surgical Applications
The 11 3/4″ VATS Needle Holder FineTouch Jaws may be used for cardiovascular and thoracic surgery applications involving controlled needle handling and suturing. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the VATS Needle Holder before use, paying particular attention to the working end, jaw alignment, and cutting edges. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the VATS Needle Holder appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this VATS Needle Holder?
The overall length is 11 3/4 inches.
2. What is the working end / blade or tip design of the instrument?
It features 5 mm.
3. Is this VATS Needle Holder curved or straight?
It features a fine configuration.
4. What is a VATS Needle Holder used for?
It is designed for controlled needle handling and suturing in cardiovascular applications.
5. What clinical advantage does the fine configuration provide?
The fine configuration provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for cardiovascular surgery?
It may be used in cardiovascular and thoracic surgery applications where a fine needle holder is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the VATS Needle Holder be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.